CAT CLASS: HQ-10858

Up to 10 ft Frame and Brace Scaffold

Up to 10 ft frame and brace scaffolds comprise one or two stacked frames reaching maximum working heights between 3.0 and 6.6 ft. This is the entry point in the frame and brace scaffold ladder, suited to interior drywall finishing, low ceiling work, and exterior trim within a single story. For work above approximately 10 ft or multi-frame stacking, the 10-20 ft size class becomes appropriate.

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Max height	3–6.6 ft (0.9–2.0 m)	Working platform height with one or two frames stacked.
Load capacity	227–529 kg (500–1,165 lbs)	Combined weight of workers, tools, and materials the platform can support.

Comment choisir

Up to 10 ft frame and brace scaffolds fit interior ceiling work, drywall taping, and low-reach exterior trim where a single or double frame stack suffices. The compact height suits residential rooms, hallways, and tight indoor spaces. When work routinely exceeds 10 ft reach or requires three or more stacked frames, the 10-20 ft Frame and Brace Scaffold class offers compatible components and engineered bracing for taller assemblies. There is no smaller frame and brace scaffold size class; jobs needing less than 3 ft elevation typically use rolling platforms or step stools outside the scaffolding category.

Ce que cette taille peut gérer

Installing or finishing drywall in residential rooms with 8–10 ft ceilings
Painting interior walls and low ceilings in hallways or apartments
Installing exterior trim, shutters, or light fixtures on single-story homes
Taping and mudding ceiling seams in new construction interiors
Electrical or HVAC work in accessible drop ceilings
Light maintenance or window washing on low commercial facades

Sécurité et opération

All frames must rest on stable, level ground or baseplates; soft soil or uneven surfaces require mud sills or adjustable screw jacks.
Cross braces must engage fully at all connection points; partial engagement compromises lateral stability.
Guardrails are required on all open sides of platforms 10 ft or higher, though best practice includes them at any working height.
Load capacity includes the combined weight of personnel, tools, and materials; exceeding rated capacity risks platform collapse or frame buckling.

Transport et logistique

Individual frames and cross braces typically load by hand into a pickup truck bed or cargo van.
Complete one- or two-frame assemblies are lightweight enough for two workers to lift and load without mechanical assistance.
Planks and accessories bundle together; total payload for a basic kit rarely exceeds 200 kg, fitting within standard light-duty vehicle capacities.

Alimentation

Frame and brace scaffolds require no external power or fuel; they are passive structural systems.
Tools used on the platform draw power from portable generators, building circuits, or battery packs independent of the scaffold itself.

Questions fréquentes

What defines the 'up to 10 ft' threshold in this size class?

The threshold refers to the maximum assembled scaffold height, typically one or two frames stacked with working platform, reaching roughly 3.0 to 6.6 ft based on manufacturer frame dimensions. Beyond two frames or approximately 10 ft total height, the 10-20 ft size class incorporates additional bracing and stabilization components.

Can frames from different manufacturers be mixed in a single assembly?

Mixing brands within a scaffold stack is strongly discouraged. Frame dimensions, coupling designs, and load ratings vary between manufacturers; incompatible components may not lock securely or may create uneven load paths that compromise structural integrity.

How does load capacity differ between single-frame and two-frame assemblies?

Load capacity is typically rated per platform deck, not per frame count. A two-frame stack at greater height may have the same platform load rating as a single frame, but stability and bracing requirements increase with height to prevent tipping or lateral movement.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Hauteur max	Capacité de charge
Metaltech Wall Bracket	3.1 ft (0.9 m)	1,001 lb (454 kg)
Cotterman Standard Crossover Bridge	3.5 ft (1.1 m)	500 lb (227 kg)
Layher AGS System	6.6 ft (2.0 m)	1,166 lb (529 kg)
Perry SU-4 Step-Up Scaffolding — 4 Ft. Tall	4.3 ft (1.3 m)	500 lb (227 kg)
Perry SU-5 Step-Up Scaffolding — 5 Ft. Tall	5.1 ft (1.6 m)	600 lb (272 kg)
Perry SU-6 Step-Up Scaffolding — 6 Ft. Tall	6 ft (1.8 m)	600 lb (272 kg)