ZW180-7

Name: Hitachi ZW180-7
Brand: Hitachi

173 hp

Puissance moteur

33,202 lb (15,060 kg)

Poids en service

Équivalents entre marques

Comparer côte à côte →

Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.

Modèle	Correspondance	Puissance moteur	Poids en service
JCB 436	98%	178 hp	33,069 lb (15,000 kg)
Case 721G	97%	179 hp	32,633 lb (14,802 kg)
Sany SW305K	95%	163 hp	31,967 lb (14,500 kg)
XCMG XC948	94%	173 hp	29,101 lb (13,200 kg)
John Deere 544P	93%	165 hp	29,943 lb (13,582 kg)
Case 621G	92%	172 hp	28,160 lb (12,773 kg)

Documents

Datasheet ↓

Spécifications complètes

Air Conditioning System	The air conditioning system contains fluorinated greenhouse gases. Refrigerant type: HFC-134a, GWP: 1430, Amount: 0.75±0.05kg, CO2e: 1.07±0.07ton.	↗
Aspiration	Turbocharger and intercooled	↗
Backhoe Bucket ISO Heaped	2.5 - 5.2 m 3	↗
Batteries	2 x 12 V	↗
Bore and stroke	107 mm X 124 mm	↗
Breakout force (kN)	128 kN 13 010 kgf (Standard arm) 103 kN 10 470 kgf (High-lift arm)	↗
Cylinders	Double-acting piston type	↗
DEF AdBlue® tank	25 L	↗
Drive system	Four-wheel drive system	↗
Engine Emissions	EU Stage V	↗
Engine Model	CUMMINS B6.7	↗
Engine Rated Power (kW)	129kW (173 hp) (ISO2007 net)	↗
Engine Type	4-Cycle water-cooled, direct injection	↗
Engine coolant	25 L	↗
Engine oil	25 L	↗
External sound level according to ISO 6395 and EU Directive 2000 14 EC	104 LwA dB(A)	↗
Front axle differential & wheel hubs	31 L	↗
Fuel tank	230 L	↗
Ground clearance (minimum) (mm)	15.7 in (400 mm)	↗
Height to bucket hinge pin, fully raised (mm)	3 925	↗
Hydraulic cylinders Type	Double acting type	↗
Hydraulic oil tank	100 L	↗
Lift arm clearance at max lift (mm)	3 670 mm (standard arm) 4 055 mm ( High-lift arm)	↗
Main pump	Variable Displacement Axial Plunger Pump	↗
Maximum flow	224 L/min at 2 200 min-1 (rpm)	↗
Maximum power ISO 14396	129 kW / 173 hp	↗
Maximum torque, gross	1 104 Nm at 1 100 min-1 (rpm)	↗
No. of cylinders	6	↗
No. x Bore x Stroke	Arm : 2 x 125 mm x 765 mm Bucket : 1 x 110 mm x 995 mm	↗
Operating weight (kg)	14 950 - 15 170 kg	↗
Optional	Refer to standard & optional equipment list	↗
Oscillation angle	Total 20° (+10° ,-10°)	↗
Overall height up to cab top (mm)	3 310 mm	↗
Overall length (without bucket) (mm)	6 725 mm (standard arm) 7 225 mm (High-lift arm)	↗
Parking brakes	Spring applied, hydraulically released, dry disc type with external output shaft.	↗
Piston displacement	6.69 L	↗
Rear axle differential & wheel hubs	34 L	↗
Service brakes	Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit.	↗
Sound level in cab according to ISO 6396	67 LpA dB(A)	↗
Static tipping load (Straight) (kg)	12 570 kg (Standard arm) 9 780 kg (High-lift arm)	↗
Steering angle	Each direction 40o ; total 80°	↗
Tire size	20.5R25 (L3)	↗
Torque converter	Three elements, single stage, single phase	↗
Torque converter & transmission	30 L	↗
Transmission	Torque converter, countershaft type powershift with the computer-controlled automatic shift and manual shift features included.	↗
Travel speed* Forward Reverse 1st	5.9 / 6.2 km/h (6.3 . 6.6 km/h)	↗
Travel speed* Forward Reverse 2nd	11.5 / 12.1 km/h (12.2 / 12.9 km/h)	↗
Travel speed* Forward Reverse 3rd	17.5 / 26.5 km/h (18.5 /28.3 km/h)	↗
Travel speed* Forward Reverse 4th	25.3 km/h (27 km/h)	↗
Travel speed* Forward Reverse 5th	39 km/h (39 km/h)	↗
Turning radius (centerline of outside tire) (mm)	5 235 mm	↗
Turning radius to inside of tires (mm)	2 995	↗
Type	Articulated frame steering	↗