ZW220-7

Name: Hitachi ZW220-7
Brand: Hitachi

200 hp

Puissance moteur

41,491 lb (18,820 kg)

Poids en service

Équivalents entre marques

Comparer côte à côte →

Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.

Modèle	Correspondance	Puissance moteur	Poids en service
Case 821G	97%	206 hp	40,058 lb (18,170 kg)
Kawasaki 80Z7	95%	193 hp	38,625 lb (17,520 kg)
Kawasaki 80ZV	95%	208 hp	38,867 lb (17,630 kg)
XCMG XC948U	94%	200 hp	36,376 lb (16,500 kg)
XCMG XC958E	94%	225 hp	41,601 lb (18,870 kg)
XCMG XC948E	94%	200 hp	36,376 lb (16,500 kg)

Documents

Datasheet ↓

Spécifications complètes

Air Conditioning System	The air conditioning system contains fluorinated greenhouse gases. Refrigerant type: HFC-134a, GWP: 1430, Amount: 0.80±0.05kg, CO2e: 1.14±0.07ton.	↗
Aspiration	Turbocharger and intercooled	↗
Batteries	2 X 12 V	↗
Bore and stroke	107 mm X 124 mm	↗
Breakout force (kN)	156 - 124 kN	↗
Bucket capacity (m³) ISO Heaped	2.8 - 10.0 m 3	↗
Cylinders	Double-acting piston type	↗
DEF AdBlue® tank	25 L	↗
Drive system	Four-wheel drive system	↗
Engine Emissions	EU Stage V	↗
Engine Model	CUMMINS B6.7	↗
Engine Rated Power (kW)	149 kW (ISO14396)	↗
Engine Type	4 cycle water-cooled, direct injection	↗
Engine coolant	29 L	↗
Engine oil	25 L	↗
External sound level according to ISO 6395 and EU Directive 2000 14 EC	LwA 105 dB(A)	↗
Front axle differential & wheel hubs	32 L	↗
Fuel tank	255 L	↗
Ground clearance (minimum) (mm)	450	↗
Height to bucket hinge pin, fully raised (mm)	4 080 (standard arm) / 4 490 (high-lift arm)	↗
Hydraulic cylinders Type	Double acting type	↗
Hydraulic oil tank	114 L	↗
Lift arm clearance at max lift (mm)	3 770 (standard arm) / 4 180 (high-lift arm)	↗
Main pump	Variable Displacement Axial Plunger Pump	↗
Maximum flow	275 L/min at 2 200 (rpm)	↗
Maximum power ISO 14396	157 kW (210 hp) at 1 900 (rpm)	↗
Maximum torque, gross	990 Nm at 1 300 (rpm)	↗
No. of cylinders	6	↗
No. x Bore x Stroke	Arm: 2 x 130 mm x 880 mm / Bucket: 1 x 165 mm x 510 mm	↗
Operating weight (kg)	18 190 - 19 450 kg	↗
Optional	Refer to standard and optional equipment list	↗
Oscillation angle	Total 24˚ (+12˚,-12˚)	↗
Overall height up to cab top (mm)	3 370	↗
Overall length (without bucket) (mm)	7 110 (standard arm) / 7 610 (high-lift arm)	↗
Parking brakes	Spring applied, hydraulically released, dry disc type with external output shaft	↗
Piston displacement	6.69L	↗
Rear axle differential & wheel hubs	32 L	↗
Service brakes	Inboard mounted fully hydraulic 4 wheel wet disc brake. Front & rear independent brake circuit	↗
Sound level in cab according to ISO 6396	LpA 68 dB(A)	↗
Static tipping load (Straight) (kg)	15 230 - 11 780 kg	↗
Steering angle	Each direction 37°; total 74°	↗
Tire size	23.5R25 (L3)	↗
Torque converter	Three element, single stage, single phase	↗
Torque converter & transmission	27 L	↗
Transmission	Torque convertershaft type powershift with computer-controlled automatic shift and manual shift features included.	↗
Travel speed* Forward Reverse 1st	6.3 / 6.6 km/h (6.3 / 6.7 km/h)	↗
Travel speed* Forward Reverse 2nd	10.9 / 11.4 km/h (11.4 / 12.0 km/h)	↗
Travel speed* Forward Reverse 3rd	16.0 / 24.8 km/h (17.3 / 26.9 km/h)	↗
Travel speed* Forward Reverse 4th	23.7 km/h (25.7 km/h)	↗
Travel speed* Forward Reverse 5th	36.3 km/h (36.3 km/h)	↗
Turning radius (centerline of outside tire) (mm)	6 010	↗
Turning radius to inside of tires (mm)	3 530	↗
Type	Articulated frame steering	↗