Takeuchi
TW60 Series 2
61 hp
Puissance moteur
10,759 lb (4,880 kg)
Poids en service
61.5 L
fuel tank capacity
23 MPa
hydraulic system pressure
123 in (3,130 mm)
max lift height
20 km/h
max travel speed
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Poids en service | fuel tank capacity |
|---|---|---|---|---|
| Yanmar V8 | 99% | 62 hp | 10,803 lb (4,900 kg) | - |
| XCMG LW180FV | 96% | 62 hp | 11,684 lb (5,300 kg) | - |
| Hitachi ZW75-6 | 94% | 67 hp | 11,133 lb (5,050 kg) | - |
| XCMG LW160FV | 94% | 54 hp | 10,582 lb (4,800 kg) | - |
| Gehl AL650 | 90% | 64 hp | 9,149 lb (4,150 kg) | - |
| Gehl AL750 | 90% | 74 hp | 10,540 lb (4,781 kg) | - |
Documents
Spécifications complètes
| ENGINE - Horsepower @ 2,300 rpm | 61.2 (45.6 kW) hp | ↗ |
| ENGINE - Make/Model | Yanmar 4TNV86CHT-MAW | ↗ |
| ENGINE - Maximum Torque @ 1,800 rpm | 146.0 (198.0 Nm) ft-lb | ↗ |
| Engine Displacement | 128.0 (2.1 L) cu in | ↗ |
| FLUID CAPACITIES - Cooling System | 8.9 (8.5 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 7.8 (7.4 L) qt | ↗ |
| FLUID CAPACITIES - Front Axle Lubrication | 4.9 (4.6 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 3.4 (12.8 L/hr) gal/hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 16.2 (61.5 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 10.8 (41.0 L) gal | ↗ |
| FLUID CAPACITIES - Rear Axle Lubrication | 4.6 (4.4 L) qt | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 15.2 (57.5 Lpm) gpm | ↗ |
| Hydraulic System Pressure | 3,408 (23.5 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Bucket Clearance Height | 9 (2,964 mm) ft 8.7 in | ↗ |
| MACHINE DIMENSIONS - Dump Angle | 46 ° | ↗ |
| MACHINE DIMENSIONS - Dump Height Fully Raised | 7 (2,263 mm) ft 5.0 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 20.5 520 mm) in | ↗ |
| MACHINE DIMENSIONS - Inside Turning Radius | 6 (1,840 mm) ft 5.3 in | ↗ |
| MACHINE DIMENSIONS - Max. Lift Height to Bucket Pin | 10 (3,294 mm) ft 9.7 in | ↗ |
| MACHINE DIMENSIONS - Max. Reach Fully Raised | 2 (670 mm) ft 2.4 in | ↗ |
| MACHINE DIMENSIONS - Outside Turning Radius | 12 (3,690 mm) ft 1.3 in | ↗ |
| MACHINE DIMENSIONS - Overall Height | 8 (2,599 mm) ft 6.4 in | ↗ |
| MACHINE DIMENSIONS - Overall Length with Bucket | 17 (5,360 mm) ft 7.1 in | ↗ |
| MACHINE DIMENSIONS - Overall Operating Height | 12 (3,766 mm) ft 4.3 in | ↗ |
| MACHINE DIMENSIONS - Overall Width without Bucket | 6 (1,905 mm) ft 3.0 in | ↗ |
| MACHINE DIMENSIONS - Recommended Bucket Width | 76.5 (1,943 mm) in | ↗ |
| MACHINE DIMENSIONS - Rollback Angle | 43 ° | ↗ |
| MACHINE DIMENSIONS - Wheel Base | 6 (2,000 mm) ft 6.7 in | ↗ |
| OPERATING PERFORMANCE - Bucket Breakout Force | 6,294 (2,855kg) lb | ↗ |
| OPERATING PERFORMANCE - Lift Arm Breakout Force | 6,002 (2,722 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Capacity, SAE J818* | 2,953 (1,340 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Cab | 10,692 (4,850 kg) lb | ↗ |
| OPERATING PERFORMANCE - Optional High Speed Travel | 17.4 (28.0 km/hr) mph | ↗ |
| OPERATING PERFORMANCE - Tipping Load, Full Turn | 5,906 (2,679 kg) lb | ↗ |
| OPERATING PERFORMANCE - Tipping Load, Straight | 6,689 (3,034 kg) lb | ↗ |
| OPERATING PERFORMANCE - Traction Force | 8,818 (4,000 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High Range | 12.4 (20.0 km/hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low Range | 4.0 (6.5 km/hr) mph | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →