Vermeer
AX17 Brush Chipper
130 hp
Puissance moteur
40.0 gal
Capacité de carburant
9,751 lb (4,423 kg)
Poids en service
17.0 in (43.2 cm)
chipping capacity
20 in (50.8 cm)
drum width
29 m/min
feed speed max
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Capacité de carburant | Poids en service |
|---|---|---|---|---|
| Morbark Eeger Beever 1621X | 89% | 142 hp | 32.0 gal | 10,201 lb (4,627 kg) |
| Morbark Eeger Beever 1922 | 88% | 157 hp | 44.0 gal | 10,900 lb (4,944 kg) |
| Bandit Intimidator 18XP | 87% | 174 hp | - | 9,700 lb (4,400 kg) |
| Morbark M18R | 86% | 114 hp | 44.0 gal | 12,200 lb (5,534 kg) |
| Morbark Eeger Beever 1821 | 85% | 157 hp | 32.0 gal | 8,900 lb (4,037 kg) |
| Bandit Intimidator 15XP | 82% | 174 hp | - | 8,001 lb (3,629 kg) |
Documents
Spécifications complètes
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 -Stage Dry | ↗ |
| Alternator | 60 amp | ↗ |
| Auto Reverse PSI | 2800 psi | ↗ |
| Axle/Suspension | 10,000 -lb torsion | ↗ |
| Battery | Group 31 - 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 2 | ↗ |
| Bedknife Material | 1018 | ↗ |
| Bedknife Size | 3 in x 20.25 in (7.6 cm x 51.4 cm) | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Yes | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.9 in (73.7 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | .12 in | ↗ |
| Bottom Thickness | .7 in | ↗ |
| Brake Type | Standard electric | ↗ |
| Capacity - Option One | 10,000 lb (4,536 kg) | ↗ |
| Chute Height | 110 in (281 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual lever | ↗ |
| Clutch Type | Spring-loaded clutch | ↗ |
| Controller | MPC-12 | ↗ |
| Coolant Capacity (Engine and Radiator) | 5.5 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 26 in (66.0 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MPC-12 | ↗ |
| Distance from Feed Table to Ground | 30 in (76.2 cm) | ↗ |
| Dynamic Capacity | 41,800 lbs (18,960 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 22 in suction | ↗ |
| Feed Roller Clamp Load | 3,000 lbs (1,361 kg) | ↗ |
| Feed Roller Clamp Type | Hydraulic | ↗ |
| Feed Roller Dimension | 15 in x 20 in (38.1 cm x 50.8 cm) | ↗ |
| Feed Roller Dimension (Two) | 11 in x 20 in (27.9 cm x 50.8 cm) | ↗ |
| Feed Roller Minimum Distance to Drum | .4 in | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 95 ft/min | ↗ |
| Fender Description | Bolt-on steel | ↗ |
| Filtration Method | 3 micron return, no suction | ↗ |
| Fixture Method | Weld On | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | Z Channel: .25-in (.64-cm) thickness | ↗ |
| Fuel Tank Capacity | 40 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 134 hp | ↗ |
| Height | 110 in (281 cm) | ↗ |
| Hitch Type | 3-in ID pintle | ↗ |
| Hydraulic Chute Controls | Optional | ↗ |
| Hydraulic Outriggers | Optional | ↗ |
| Infeed Hopper Height | 29 in (73.7 cm) | ↗ |
| Infeed Table Length | 52 in (132 cm) | ↗ |
| Infeed Table Material Thickness | .3 in | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →