Vermeer
BC1800XL Gas Brush Chipper
165 hp
Puissance moteur
50.0 gal
Capacité de carburant
8,801 lb (3,992 kg)
Poids en service
19.0 in (48.3 cm)
chipping capacity
110 in (279 cm)
discharge height
36.0 in (91.4 cm)
drum width
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Capacité de carburant | Poids en service |
|---|---|---|---|---|
| Bandit 255XP | 94% | 174 hp | - | 8,199 lb (3,719 kg) |
| Bandit Intimidator 18XP | 93% | 174 hp | - | 9,700 lb (4,400 kg) |
| Morbark Eeger Beever 1922 | 88% | 157 hp | 44.0 gal | 10,900 lb (4,944 kg) |
| Bandit 250XP | 86% | 174 hp | - | 6,799 lb (3,084 kg) |
| Morbark Eeger Beever 1821 | 86% | 157 hp | 32.0 gal | 8,900 lb (4,037 kg) |
| Bandit Intimidator 15XP | 84% | 174 hp | - | 8,001 lb (3,629 kg) |
Documents
Spécifications complètes
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 Stage Dry | ↗ |
| Air Flow | 3544 cfm | ↗ |
| Alternator | 70 | ↗ |
| Auto Reverse PSI | 2650 psi | ↗ |
| Axle/Suspension | Torflex | ↗ |
| Battery | 950 cca | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 CD | ↗ |
| Bedknife Size | 3" x 20.25" | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Spring loaded | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.9 in (73.7 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 10,000 | ↗ |
| Chute Height | 110 in (279 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual Lever | ↗ |
| Clutch Type | 13" Spring Loaded Clutch | ↗ |
| Controller | Vermeer ACS: CB02 | ↗ |
| Coolant Capacity (Engine and Radiator) | 5 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MFD | ↗ |
| Distance from Feed Table to Ground | 30.5 in (77.5 cm) | ↗ |
| Dynamic Capacity | 41,800 lbs (18,960 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 18.7 | ↗ |
| Feed Roller Clamp Load | 380 lbs (172 kg) | ↗ |
| Feed Roller Clamp Type | Spring | ↗ |
| Feed Roller Dimension | 23.5" x 18" | ↗ |
| Feed Roller Dimension (Two) | 23.5" x 18" | ↗ |
| Feed Roller Orientation | Vertical | ↗ |
| Feed Speed | 117 ft/min | ↗ |
| Fender Description | Integrated | ↗ |
| Filtration Method | 3 micron return, 100 micron suction | ↗ |
| Fixture Method | Weld on | ↗ |
| Flow Control | Yes | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7" x 2.13" Channel | ↗ |
| Fuel Tank Capacity | 50 gal | ↗ |
| Fuel Type | Gas | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 172 hp | ↗ |
| Height | 107 in (272 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Hydraulic Chute Controls | Optional | ↗ |
| Infeed Hopper Height | 34 in (86.4 cm) | ↗ |
| Infeed Table Length | 36 in (91.4 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 67 in (170 cm) | ↗ |
| Infeed Throat Capacity | 20" x 24" | ↗ |
| Knife Size | 0.625 x 5 x 10 | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →