Vermeer
BC700XL Brush Chipper
25 hp
Puissance moteur
6.0 gal
Capacité de carburant
1,799 lb (816 kg)
Poids en service
6.0 in (15.2 cm)
cutting capacity
8.0 in (20.3 cm)
cutting width
23.9 in (60.7 cm)
disc diameter
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Capacité de carburant | Poids en service |
|---|---|---|---|---|
| Bandit 75XP | 82% | 37 hp | - | 2,101 lb (953 kg) |
| Morbark TW 160PH | 80% | 22 hp | 4.8 gal | 1,340 lb (608 kg) |
| Bandit 65XP | 79% | 37 hp | - | 2,000 lb (907 kg) |
| Morbark TW 230HB | 78% | 37 hp | 4.8 gal | 1,565 lb (710 kg) |
| Bandit FLYER-75XP-WEB | 77% | 37 hp | - | 2,101 lb (953 kg) |
| Morbark TW 230VTR | 68% | 37 hp | 9.0 gal | 2,584 lb (1,172 kg) |
Documents
Spécifications complètes
| Air Cleaner | Kohler HD 2-Stage Dry | ↗ |
| Air Flow | 5000 cfm | ↗ |
| Alternator | 20 A Charging | ↗ |
| Axle/Suspension | 2000 lb/(907.2 kg) rubber torsion axle | ↗ |
| Axle/Suspension - Option Two | 2000lb/(907.2 kg) rubber torsion axle with electric brakes | ↗ |
| Battery | Group 26, 400 CCA | ↗ |
| Bedknife Material | ASTM A572 Grade 50 | ↗ |
| Bedknife Size | 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert | ↗ |
| Belt Idler/Tensioner | Spring-loaded adjustable Idler | ↗ |
| Belt Type | 2-band 5-V profile Aramid | ↗ |
| Bore | 1.5 in (38.1 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 12" (30.48 cm) | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric optional | ↗ |
| Capacity - Option One | 2000 lb/(907.2 kg) | ↗ |
| Capacity - Option Two | 2000 lb/(907.2 kg) | ↗ |
| Chute Height | 97.2 in (247 cm) | ↗ |
| Chute Rotation Angle | 240 deg | ↗ |
| Clutch Type | Manual | ↗ |
| Controller | Vermeer ACS CB02 | ↗ |
| Cooling Medium | Oil/Air | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 23.9 in (60.7 cm) | ↗ |
| Distance from Feed Table to Ground | 28.1 in (71.4 cm) | ↗ |
| Dynamic Capacity | 5,640 lbs (2,558 kg) | ↗ |
| Extended Warranty | Available, Optional | ↗ |
| Feed Roller Clamp Load | 525 lbs (238 kg) | ↗ |
| Feed Roller Clamp Type | Spring/Feed Roller Weight | ↗ |
| Feed Roller Dimension | 10" Diameter | ↗ |
| Feed Roller Minimum Distance to Drum | 4 in (10.2 cm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 49.4 ft/min | ↗ |
| Fender Description | .1"/(.3 cm) Steel bolt-on | ↗ |
| Filtration Method | Return flow filtration, 10 micron | ↗ |
| Fixture Method | Welded | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 3/16"/(.5 cm) ASTM A1011 steel | ↗ |
| Fuel Tank Capacity | 6 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 25 hp | ↗ |
| Height | 102 in (259 cm) | ↗ |
| Hitch Type | 2"/(5.1 cm) ball coupler | ↗ |
| Infeed Hopper Height | 22.1 in (56.1 cm) | ↗ |
| Infeed Table Length | 30.2 in (76.7 cm) | ↗ |
| Infeed Table Width | 41.2 in (105 cm) | ↗ |
| Infeed Throat Capacity | 6" x 8" (15.24 cm x 20.32 cm) | ↗ |
| Knife Thickness | .6 in | ↗ |
| Length - Feed Table Up, Tongue In | 115 in (292 cm) | ↗ |
| Length - Table Down, Tongue Extended | 136 in (345 cm) | ↗ |
| Make and Model | Kohler ECH740 | ↗ |
| Manufacturer | Linkbelt | ↗ |
| Manufacturer - Option One | Dexter | ↗ |
| Manufacturer - Option Two | Dexter | ↗ |
| Material | A8 Chipper Steel | ↗ |
| Material Capacity | 6 in (15.2 cm) | ↗ |
| Material Thickness | .1 in | ↗ |
| Max Fuel Consumption | 2.4 gph | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →