Vermeer
BC900XL Brush Chipper
35 hp
Puissance moteur
16.0 gal
Capacité de carburant
3,100 lb (1,406 kg)
Poids en service
1,500 rpm
disc speed
60.6 L
fuel tank capacity
9.0 in (22.9 cm)
infeed opening height
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Capacité de carburant | Poids en service |
|---|---|---|---|---|
| Bandit 90XC | 88% | 40 hp | - | 3,501 lb (1,588 kg) |
| Bandit 75XP | 81% | 37 hp | - | 2,101 lb (953 kg) |
| Bandit FLYER-75XP-WEB | 81% | 37 hp | - | 2,101 lb (953 kg) |
| Morbark 1000 | 79% | 25 hp | - | 2,650 lb (1,202 kg) |
| Bandit 90XP | 79% | 37 hp | - | 3,999 lb (1,814 kg) |
| Morbark TW 230VTR | 78% | 37 hp | 9.0 gal | 2,584 lb (1,172 kg) |
Documents
Spécifications complètes
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Air Cleaner | Engine-mounted | ↗ |
| Air Flow | 3925 cfm | ↗ |
| Alternator | 20 amp | ↗ |
| Auto Reverse PSI | 2300 psi | ↗ |
| Axle/Suspension | 3500 lb (1587.6 kg) | ↗ |
| Axle/Suspension - Option Two | 3500 lb (1587.6 kg) with electric brakes | ↗ |
| Battery | Group 24 - 580 CCA | ↗ |
| Bedknife - Number of Useable Edges | 2 | ↗ |
| Bedknife Material | Grade 50 | ↗ |
| Bedknife Size | 5" x 12.1" (12.7 cm x 30.7 cm) horizontal and 5" x 8.8" (12.7 cm x 22.4 cm) vertical | ↗ |
| Bedknife Thickness | .8 in | ↗ |
| Belt Idler/Tensioner | Yes | ↗ |
| Belt Type | Chipper - Polyester Cord with wrap | ↗ |
| Bore | 2.2 in (55.9 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Capacity - Option One | 3500 (1587.6 kg) | ↗ |
| Chute Height | 96.7 in (246 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Clutchless PTO | ↗ |
| Controller | Vermeer ACS | ↗ |
| Cooling Medium | Air | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 33 in (83.8 cm) | ↗ |
| Distance from Feed Table to Ground | 29 in (73.7 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Yes | ↗ |
| Feed Roller Clamp Load | 560 lbs (254 kg) | ↗ |
| Feed Roller Clamp Type | Spring/weight | ↗ |
| Feed Roller Dimension | 15.8" dia x 13.5" long (40 cm x 34.3 cm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 140 ft/min | ↗ |
| Fender Description | Bolt-on | ↗ |
| Filtration Method | 10 micron return | ↗ |
| Fixture Method | Bolt-on | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 3/16 in. x 5-5/8 in. (.5 cm x 14.3 cm) | ↗ |
| Fuel Tank Capacity | 16 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 35 hp | ↗ |
| Height | 97 in (246 cm) | ↗ |
| Hitch Type | Pintle or ball | ↗ |
| Infeed Hopper Height | 32 in (81.3 cm) | ↗ |
| Infeed Table Length | 26 in (66.0 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 48 in (122 cm) | ↗ |
| Infeed Throat Capacity | 9 in x 14 in (22.9 cm x 35.6 cm) | ↗ |
| Knife Size | 5" x 11.75" (12.7 cm x 29.8 cm) | ↗ |
| Knife Thickness | .6 in | ↗ |
| Length - Feed Table Up, Tongue In | 140 in (357 cm) | ↗ |
| Length - Table Down, Tongue Extended | 155 in (393 cm) | ↗ |
| Make and Model | Briggs and Stratton Vanguard | ↗ |
| Manufacturer | Linkbelt | ↗ |
| Manufacturer - Option One | Dexter | ↗ |
| Manufacturer - Option Two | Dexter | ↗ |
| Material | A8 chipper steel | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →