Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Bandit Bandit 150XP Brush Chipper | Vermeer Vermeer HG200 Brush Chipper | Vermeer Vermeer BPX9000 Brush Chipper | Morbark Morbark M12R Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 5,501 lb (2,495 kg) | 5,540 lb (2,513 kg) | 5,060 lb (2,295 kg) | 5,501 lb (2,495 kg) |
| Fuel capacity | - | - | - | 24.5 gal |
| Engine power | 89 hp | 85 hp | 85 hp | - |
| Bale weight capacity | - | - | 2,500 lb (1,134 kg) | - |
| Capacity | 12 in (30.5 cm) | - | - | - |
| Chipping capacity | - | - | - | 12 in (30.5 cm) |
| Conveyor belt width | - | 18.0 in (45.7 cm) | - | - |
| Cutting disc diameter | 40 in (102 cm) | - | - | - |
| Cutting disc rpm | 1,150 RPM | - | - | - |
| Discharge height | - | 5.6 ft (1.7 m) | - | - |
| Drawbar weight | - | - | 1,460 lb (662 kg) | - |
| Drum tip diameter | - | 22.3 in (56.6 cm) | - | - |
| Drum width | - | - | 78.0 in (198 cm) | 14.5 in (36.8 cm) |
| Engine power max | - | - | - | 130 HP |
| Feed rate | 90 FPM | - | - | - |
| Feed throat height | - | 12.5 in (31.8 cm) | - | - |
| Fuel tank capacity | 29 gallon | 94.6 L | - | - |
| Hydraulic flow rate | - | - | 30.3 L/min | - |
| Hydraulic pressure | - | - | 137.9 bar | - |
| Infeed opening width | - | - | - | 60 in (152 cm) |
| Pto speed | - | - | 1,000 rpm | - |
| Rotor cutting length | - | 16.5 in (41.9 cm) | - | - |
| Throat opening width | 17 in (43.2 cm) | - | - | 15 in (38.1 cm) |
Normalised to the same units. A dash means the figure was not published.