Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Morbark Morbark M15R Brush Chipper | Bandit Bandit Intimidator 15XP Brush Chipper | Bandit Bandit 280HD Brush Chipper | Vermeer Vermeer AX19 Brush Chipper Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 13,499 lb (6,123 kg) | 12,000 lb (5,443 kg) | 13,001 lb (5,897 kg) | 11,199 lb (5,080 kg) |
| Fuel capacity | 32.0 gal | - | - | 40.0 gal |
| Engine power | 174 hp | 139 hp | 213 hp | 173 hp |
| Chipper capacity | - | - | 18 in (45.7 cm) | - |
| Chipping capacity | 15 in (38.1 cm) | 15 in (38.1 cm) | 18 in (45.7 cm) | 19.0 in (48.3 cm) |
| Cutting capacity | - | 15.0 in (38 cm) | - | - |
| Drum diameter | 30 in (76.2 cm) | 37.0 in (94 cm) | - | - |
| Drum rpm | - | 1,080 RPM | - | - |
| Drum speed | - | - | - | 1,100 rpm |
| Drum width | - | 18.5 in (47 cm) | - | - |
| Feed rate | - | - | 100 fpm | - |
| Feed speed | - | - | - | 36.3 m/min |
| Fuel tank capacity | - | 189.3 L | 60 gallon | 151.4 L |
| Hydraulic capacity | 26 gallons | - | - | - |
| Hydraulic flow | - | - | 10 GPM | - |
| Hydraulic tank capacity | - | - | 30 gallon | - |
| Infeed opening width | 56 in (142 cm) | - | - | - |
| Max torque | - | - | - | 667.1 Nm |
| Pull in force | - | - | - | 11,674 lb (5,295 kg) |
| Travel speed max | - | 4.1 MPH | - | - |
Normalised to the same units. A dash means the figure was not published.