Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Morbark Morbark TW 230HB Brush Chipper | Bandit Bandit 65XP Brush Chipper | Bandit Bandit 75XP Brush Chipper | Vermeer Vermeer BC160XL Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 1,565 lb (710 kg) | 2,000 lb (907 kg) | 2,101 lb (953 kg) | 1,653 lb (750 kg) |
| Fuel capacity | 4.8 gal | - | - | - |
| Engine power | 37 hp | 37 hp | 37 hp | 26 hp |
| Chipper capacity | - | 6 in (15.2 cm) | - | - |
| Chipping capacity | 6.2 in (15.7 cm) | 6 in (15.2 cm) | 7 in (17.8 cm) | - |
| Cutting capacity | - | - | 7 in (17.8 cm) | - |
| Disc diameter | - | - | 26.0 in (66 cm) | - |
| Disc rpm | - | - | 1,950 RPM | - |
| Disc speed | - | - | - | 1,800 rpm |
| Dump box capacity | - | 8.5 cubic yards | - | - |
| Feed opening width | - | - | 12.0 in (30.5 cm) | - |
| Feed rate | - | 80 fpm | - | - |
| Fuel tank capacity | 18 L | 8 gallons | - | 18 L |
| Fuel tank capacity towable | - | - | 26.5 L | - |
| Height | 7.2 ft (2.2 m) | - | - | - |
| Hydraulic flow | - | 6 gpm | - | - |
| Hydraulic tank capacity | - | 7 gallons | - | - |
| Infeed opening height | - | - | - | 6.3 in (16 cm) |
| Infeed opening width | - | - | - | 7.8 in (19.8 cm) |
| Length tray down | 11.5 ft (3.5 m) | - | - | - |
| Max diameter infeed | 6.3 in (160 mm) | - | - | - |
| Operating weight towable | - | - | 2,100 lb (952 kg) | - |
| Operating weight track | - | - | 5,501 lb (2,495 kg) | - |
| Transport length | - | - | - | 109 in (276 cm) |
| Width | 4.9 ft (1.5 m) | - | - | - |
Normalised to the same units. A dash means the figure was not published.