Bosch
CM10GD
10 in (25.4 cm)
blade diameter
5.5 in (14.0 cm)
chop cut capacity
15 A
circuit amperage
33.9 degrees
crown molding bevel detent
47 degrees
max bevel angle
120 V
voltage
Documents
Full specifications
| Amperage | 15 | ↗ |
| Bevel Angle Range | 47° left and 47° right | ↗ |
| Bevel Stops | 0°, 33.9°, 45° and 47° (L/R) | ↗ |
| Blade Diameter (in) | 10 | ↗ |
| Blade Size | 10" | ↗ |
| Case Type | No Case Included | ↗ |
| Category | Compound Miter Saws | ↗ |
| Depth Front-to-Back, Not Including Arm - In. | 30 | ↗ |
| Dust Collection | Yes | ↗ |
| Electric Motor Brake | Yes | ↗ |
| Height in | 20.5 " | ↗ |
| Height of Table from Base Feet to Table Surface - In. | 4 | ↗ |
| Includes | (1) 10 In. 60-Tooth Carbide-Tipped Saw Blade (1) Wrench (1) Work Clamp (1) Dust Bag (1) Vacuum adapter/elbow | ↗ |
| Length in | 32 " | ↗ |
| Max. Base Molding Against Fence | 3-1/4” (5-1/2" from 0° to 47° L) | ↗ |
| Max. Crown Molding (38° Spring) Angled Against Fence | 5-1/4” | ↗ |
| Max. Crown Molding (45° Spring) Angled Against Fence | 6" | ↗ |
| Max. Cut Capacity - 0° Miter 0° Bevel | 3-1/8 In. x 12 In. (Can cut 4x12 dimensional lumber when Adjustable Depth Stop is used.) | ↗ |
| Max. Cut Capacity - 0° Miter 45° Left Bevel | 1-1/2 In. x 12 In. (Can cut 2x12 dimensional lumber) | ↗ |
| Max. Cut Capacity - 0° Miter 45° Right Bevel | 1 In. x 12 In. (Can cut 1x12 dimensional lumber) | ↗ |
| Max. Cut Capacity - 45° Miter 0° Bevel | 3-1/8 In. x 8 In. (Can cut 4x8 dimensional lumber when Adjustable Depth Stop is used.) | ↗ |
| Max. Cut Capacity - 45° Miter 45° Left Bevel | 1-1/2 In. x 8 In. (Can cut 2x8 dimensional lumber) | ↗ |
| Max. Cut Capacity - 45° Miter 45° Right Bevel | 1 In. x 8 In. (Can cut 1x8 dimensional lumber) | ↗ |
| Miter Angle Range | 52° Left, 60° Right | ↗ |
| Miter Detents | 0°, 15°, 22.5°, 31.6°, 45°, (Left/Right) 60°, (Right) | ↗ |
| Miter Positive Stops | 0°, 15°, 22.5,° 31.6°, 45° (Left/Right), 60° (Right) | ↗ |
| No Load RPM | 4,800 | ↗ |
| Separate On/Off Speed Control | Blank | ↗ |
| Voltage | 120V | ↗ |
| Weight | 64 lb (29.0 kg) | ↗ |
| Width in | 26.5 " | ↗ |
| Works With | Miter Saw Stands, T1B, T4B, GTA3800, Side-Support Extension Bars, MS1238, Crown Molding Stops (Pair), MS1233, Anti-Static Vacuum Hoses VH1622A and VH1635A (by means of anti-static adapter included with those hoses), VAC008, and most other 22 mm and 35 mm anti-static hoses Other Vacuum Hoses VH1022, VH1035 and VH1635 (by means of VX120 adapter included with those hoses), VAC005 and VAC006 hoses, and most other 22 mm and 35 mm hoses, VH1622A and VH1635A (by means of anti-static adapter included with those hoses), VAC008, and most other 22 mm and 35 mm anti-static hoses, Other Vacuum Hoses, VH1022, VH1035 and VH1635 (by means of VX120 adapter included with those hoses), VAC005 and VAC006 hoses, and most other 22 mm and 35 mm hoses, Adapter for 1-1/4 in and 1-1/2 in. Vacuum Hoses, VAC002 or VAC024, Adapter for 2-1/2 in. Vacuum Hoses, VAC020 | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →