Diamond Products
CC7574DD-PRO
74 hp
Engine power
48 in (122 cm)
blade diameter
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | blade diameter |
|---|---|---|---|
| Mk Diamond MK-4036B | 58% | 30 hp | 36 in (91.4 cm) |
| Norton Clipper CS 901 D25 | 54% | 25 hp | 35.4 in (89.9 cm) |
| Mk Diamond MK-3030G | 53% | 33 hp | 30 in (76.2 cm) |
| Mk Diamond MK-3030VP | 53% | 33 hp | 30 in (76.2 cm) |
| Mk Diamond MK-3030B | 45% | 20 hp | 30 in (76.2 cm) |
| Imer Terra Cut 500 | 30% | 13 hp | 20 in (50.8 cm) |
Documents
Full specifications
| Air Filter | 4-stage with restriction indicator | ↗ |
| Arbor Size | 1" with drive pin | ↗ |
| Blade Capacity | 20–48 in (50.8–122 cm) | ↗ |
| Blade Drive | 20 V-belts | ↗ |
| Blade Raise/Lower | Electro-hydraulic | ↗ |
| Blade Shaft Diameter | 2 in (50.8 mm) | ↗ |
| Blade Shaft Gearbox | Oil bath for low maintenance | ↗ |
| Blade Shaft Horsepower | 74 HP | ↗ |
| Drive Speed | 0-250 ft/min | ↗ |
| Emissions | EPA Tier 4 Final | ↗ |
| Engine | Deutz Turbo Diesel, 4-cylinder, 3.3L | ↗ |
| Engine Rated Speed | 2600 RPM | ↗ |
| Fuel Capacity | 9 gal | ↗ |
| Horsepower | 74.3 HP | ↗ |
| Max Cutting Depth (20" blade) | 7-1/4 in | ↗ |
| Max Cutting Depth (36" blade) | 14-3/4 in | ↗ |
| Max Cutting Depth (48" blade) | 19-3/4 in | ↗ |
| Transmission | Hydro pump with dual wheel motors | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →