Diamond Products
PC4504
575 hp
Engine power
46,500 lb (21,092 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight |
|---|---|---|---|
| Astec Roadtec RX-405 Cold Planer | 87% | 430 hp | 46,899 lb (21,273 kg) |
| XCMG XM2005K(Stage V) | 83% | 599 hp | 67,241 lb (30,500 kg) |
| XCMG XM2005K(Stage Ⅲ) | 83% | 599 hp | 67,241 lb (30,500 kg) |
| Astec Roadtec RX-600 Cold Planer | 81% | 675 hp | 60,561 lb (27,470 kg) |
| Bomag BM 1000/35-2 | 74% | 349 hp | 52,911 lb (24,000 kg) |
| Bomag BM 1200/35-2 | 73% | 349 hp | 55,116 lb (25,000 kg) |
Full specifications
| Blade Shaft Diameter | 8 in (20.3 cm) | ↗ |
| Blade Shaft Speed (high) | 1900 RPM | ↗ |
| Blade Shaft Speed (low) | 1315 RPM | ↗ |
| Blade Size | 18 in (45.7 cm) | ↗ |
| Emissions | EPA Tier 4, EU Stage IV | ↗ |
| Engine | Caterpillar C18, 575 HP Turbocharged after-cooled diesel | ↗ |
| Fuel Capacity | 220 gal | ↗ |
| Fuel Consumption | 28.3 gph | ↗ |
| Grinding Width | 50 in (127 cm) | ↗ |
| Height | 9 ft 6 in | ↗ |
| Horsepower | 575 HP | ↗ |
| Length | 30 ft (9.1 m) | ↗ |
| Propulsion Motors | 4 hydraulic wheel motor assemblies | ↗ |
| Propulsion Speed | 0-250 ft/min | ↗ |
| Weight | 46,500 lbs (21,092 kg) | ↗ |
| Width | 7 ft (2.1 m) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →