Dynapac
CA1400D
74 hp
Engine power
0.1 in (1.7 mm)
amplitude
114 kN
centrifugal force
66.0 in (1,676 mm)
drum width
20 kg/cm
static linear load
150 kPa
tire pressure
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | amplitude | centrifugal force |
|---|---|---|---|---|
| Ammann ARS 110 PD | 87% | 100 hp | - | - |
| Ammann ARS 110 | 87% | 100 hp | - | - |
| Ammann ARS 50 | 81% | 58 hp | - | - |
| XCMG XP163 | 73% | 115 hp | - | - |
| XCMG XP203 | 73% | 115 hp | - | - |
| XCMG XP203S | 73% | 115 hp | - | - |
Documents
Full specifications
| A. Wheelbase | 86.6 in (2,200 mm) | ↗ |
| B1. Width, front | 73.6 in (1,870 mm) | ↗ |
| B2. Width, rear | 60.2 in (1,530 mm) | ↗ |
| Compaction width | 66.0 in (1,676 mm) | ↗ |
| Curb clearance | 14.2 in (360 mm) | ↗ |
| D. Drum diameter | 48.0 in (1,219 mm) | ↗ |
| Driving | Hydrostatic with a traction pump supplying two parallel connected motors, one on rear axle and one on drum. | ↗ |
| Drum diameter | 48.0 in (1,219 mm) | ↗ |
| Drum shell thickness | 0.9 in (22 mm) | ↗ |
| Drum width | 66.0 in (1,676 mm) | ↗ |
| Fuel tank capacity | 117 l | ↗ |
| Ground clearance | 14.2 in (360 mm) | ↗ |
| H1. Height, with ROPS/cab | 106 in (2,700 mm) | ↗ |
| H2. Height, max. | 106 in (2,700 mm) | ↗ |
| Height, max. | 106 in (2,700 mm) | ↗ |
| Height, with ROPS/cab | 106 in (2,700 mm) | ↗ |
| K1. Ground clearance | 14.2 in (360 mm) | ↗ |
| K2. Curb clearance | 14.2 in (360 mm) | ↗ |
| L. Length | 178 in (4,510 mm) | ↗ |
| Length | 178 in (4,510 mm) | ↗ |
| Manufacturer / Model | Kubota V 3307 CR-TE5 (Stage V) | ↗ |
| Max. operating mass | 16,204 lb (7,350 kg) | ↗ |
| Max. theoretical gradeability | 56 % | ↗ |
| O1. Overhang, right | 3.7 in (95 mm) | ↗ |
| O2. Overhang, left | 3.7 in (95 mm) | ↗ |
| Operating mass | 14,330 lb (6,500 kg) | ↗ |
| Operating mass (incl. Cab) | 14,771 lb (6,700 kg) | ↗ |
| Operating mass (incl. ROPS) | 14,330 lb (6,500 kg) | ↗ |
| Operating mass with cab | 14,771 lb (6,700 kg) | ↗ |
| Overhang, left | 3.7 in (95 mm) | ↗ |
| Overhang, right | 3.7 in (95 mm) | ↗ |
| Parking/Emergency brake | Failsafe multidisc brake in rear axle and front drum motor. | ↗ |
| R1. Turning radius, outside | 180 in (4,580 mm) | ↗ |
| R2. Turning radius, inside | 114 in (2,900 mm) | ↗ |
| Rated power | 55 kW | ↗ |
| Rated power, SAE J1995 | 55 kW (75 hp ) @ 2,200 rpm | ↗ |
| S. Drum shell thickness | 0.9 in (22 mm) | ↗ |
| Service brake | Hydrostatic in forward and reverse lever. | ↗ |
| Speed range | 0-10 km/h | ↗ |
| Static linear load | 20 kg/cm | ↗ |
| Steering | Mechanical-hydraulic with steering valve supplying the steering cylinder. Steering angle is proportional to steering wheel. | ↗ |
| Steering angle | ±33 ° | ↗ |
| Turning radius, inside | 114 in (2,900 mm) | ↗ |
| Turning radius, outside | 180 in (4,580 mm) | ↗ |
| Type | Water cooled turbo Diesel | ↗ |
| Vertical oscillation | ±9 º | ↗ |
| Vibration | Hydrostatic with a vibration pump supplying a motor connected to the eccentric axle generating the vibrations. | ↗ |
| W. Drum width | 66.0 in (1,676 mm) | ↗ |
| Wheelbase | 86.6 in (2,200 mm) | ↗ |
| Width, front | 73.6 in (1,870 mm) | ↗ |
| Width, rear | 60.2 in (1,530 mm) | ↗ |
| α. Steering angle | ±33° | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →