Honda
WB20
164 gpm
Flow rate
105 ft (32.0 m)
Max head
46.3 lb (21 kg)
Operating weight
2 in (50.8 mm)
discharge port diameter
122 cm3
engine displacement
2 L
fuel tank capacity
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | Operating weight |
|---|---|---|---|---|
| Magnum MDP200 | 95% | 137 gpm | 105 ft (32.0 m) | - |
| Magnum MTP200 | 88% | 185 gpm | 92 ft (28.0 m) | - |
| Ironton 750131 | 86% | 176 gpm | 82 ft (25.0 m) | - |
| Generac MDWP | 74% | - | 50 ft (15.2 m) | - |
| Generac MCP5411-3 | 74% | - | 50 ft (15.2 m) | - |
| Generac MCP5437 | 74% | - | 50 ft (15.2 m) | - |
Documents
Full specifications
| Bore and stroke | 2.4" x 1.7" | ↗ |
| Commercial Warranty | 12 months | ↗ |
| Compression Ratio | 8.5:1 | ↗ |
| Dimensions (LxWxH) | 19.3" x 14.4" x 16.5" | ↗ |
| Discharge capacity | 164 gal/min | ↗ |
| Discharge port diameter | 2" NPT | ↗ |
| Displacement | 118cc | ↗ |
| Drive system | Direct | ↗ |
| Dry weight | 44 lb. | ↗ |
| Engine | GX120 | ↗ |
| Fuel Capacity | 0.53 gal | ↗ |
| Impeller | 4 Vane Cast Iron | ↗ |
| Maximum pressure | 45 psi | ↗ |
| Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide | ↗ |
| Oil Alert | Std | ↗ |
| Priming time | 110 sec @ 16.4 ft. | ↗ |
| Pump Type | Centrifugal, Self-priming | ↗ |
| Residential Warranty | 24 months | ↗ |
| Run Time @ Max Discharge | 1.7 hr | ↗ |
| Solids handling | N/A | ↗ |
| Strainer Part # | 78325-YG3-000 | ↗ |
| Suction head lift | 25 ft. | ↗ |
| Suction port diameter | 2" NPT | ↗ |
| Total head lift | 105 ft. | ↗ |
| Volute | Rigid Mounted Cast Iron | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →