Honda
WH15
98 gpm
Flow rate
131 ft (39.9 m)
Max head
1.5 in (38.1 mm)
discharge port diameter
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | discharge port diameter |
|---|---|---|---|---|
| Ebara CDX | 82% | 66 gpm | 134 ft (41.0 m) | - |
| Magnum MDP200 | 76% | 137 gpm | 105 ft (32.0 m) | 2 in (50.8 mm) |
| Pentair Myers QP50B 5 HP Quick Prime Self-Priming Centrifugal Pump | 73% | 134 gpm | 178 ft (54.3 m) | - |
| Ebara Matrix | 72% | 119 gpm | 212 ft (64.5 m) | - |
| Magnum MTP200 | 62% | 185 gpm | 92 ft (28.0 m) | - |
| Ironton 750131 | 59% | 176 gpm | 82 ft (25.0 m) | - |
Documents
Full specifications
| Bore and stroke | 2.4" x 1.7" | ↗ |
| Commercial Warranty | 12 months | ↗ |
| Compression Ratio | 8.5:1 | ↗ |
| Dimensions (LxWxH) | 16.3" x 14.2" x 16.3" | ↗ |
| Discharge capacity | 98 gals./min. | ↗ |
| Discharge port diameter | 1.5" NPT | ↗ |
| Displacement | 118cc | ↗ |
| Drive system | Direct | ↗ |
| Dry weight | 49 lbs. | ↗ |
| Engine | GX120 | ↗ |
| Fuel Capacity | 0.53 gal | ↗ |
| Impeller | Cast Iron | ↗ |
| Maximum pressure | 57 psi | ↗ |
| Mechanical Seal (Pump case / impeller) | Carbon/Ceramic | ↗ |
| Oil Alert | N/A | ↗ |
| Priming time | 80 sec. at 16.4 ft. | ↗ |
| Pump Type | High Pressure, Centrifugal, Self-priming | ↗ |
| Residential Warranty | 24 months | ↗ |
| Run Time @ Max Discharge | 1.5 hr | ↗ |
| Solids handling | N/A | ↗ |
| Strainer Part # | 78325-YB7-020 | ↗ |
| Suction head lift | 26 ft. | ↗ |
| Suction port diameter | 1.5" NPT | ↗ |
| Total head lift | 131 ft. | ↗ |
| Volute | Rigid Mounted Cast Iron | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →