Honda
WH20
119 gpm
Flow rate
148 ft (45.1 m)
Max head
2 in (50.8 mm)
discharge port diameter
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | discharge port diameter |
|---|---|---|---|---|
| Magnum MDP200 | 86% | 137 gpm | 105 ft (32.0 m) | 2 in (50.8 mm) |
| Pentair Myers QP50B 5 HP Quick Prime Self-Priming Centrifugal Pump | 86% | 134 gpm | 178 ft (54.3 m) | - |
| Ebara Matrix | 85% | 119 gpm | 212 ft (64.5 m) | - |
| Ebara CDX | 73% | 66 gpm | 134 ft (41.0 m) | - |
| Generac MDWP | 67% | - | 50 ft (15.2 m) | 2 in (50.8 mm) |
| Generac MCP5411-3 | 67% | - | 50 ft (15.2 m) | 2 in (50.8 mm) |
Documents
Full specifications
| Bore and stroke | 2.7" x 1.8" | ↗ |
| Commercial Warranty | 12 months | ↗ |
| Compression Ratio | 9.0:1 | ↗ |
| Dimensions (LxWxH) | 20.5" x 15.7" x 18.1" | ↗ |
| Discharge capacity | 119 gals./min. | ↗ |
| Discharge port diameter | 2" NPT | ↗ |
| Displacement | 163cc | ↗ |
| Drive system | Direct | ↗ |
| Dry weight | 60 lb. | ↗ |
| Engine | GX160 | ↗ |
| Fuel Capacity | 0.82 gal | ↗ |
| Impeller | Cast Iron | ↗ |
| Maximum pressure | 64 psi | ↗ |
| Mechanical Seal (Pump case / impeller) | Carbon/Ceramic | ↗ |
| Oil Alert | N/A | ↗ |
| Priming time | 80 sec. at 16.4 ft. | ↗ |
| Pump Type | High Pressure, Centrifugal, Self-priming | ↗ |
| Residential Warranty | 24 months | ↗ |
| Run Time @ Max Discharge | 1.5 hr | ↗ |
| Solids handling | N/A | ↗ |
| Strainer Part # | 78325-YB7-702 | ↗ |
| Suction head lift | 26 ft. | ↗ |
| Suction port diameter | 2" NPT | ↗ |
| Total head lift | 148 ft. | ↗ |
| Volute | Rigid Mounted Cast Iron | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →