Honda
WSP33
40 gpm
Flow rate
23 ft (7.0 m)
Max head
1.2 inch
discharge diameter
1.2 in (30.5 mm)
discharge port diameter
40 GPM
max capacity
50 °C
max water temperature
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | discharge diameter |
|---|---|---|---|---|
| Allegro 9404-04 Sludge Pump | 67% | 50 gpm | 39 ft (11.9 m) | - |
| Pentair Myers CTJ Series Centri-Thrift Centrifugal Pumps | 65% | 105 gpm | 25 ft (7.6 m) | - |
| Allegro 9404-02 Standard Dewatering Pump | 61% | 64 gpm | 39.5 ft (12.0 m) | - |
| Generac MDWP | 54% | - | 50 ft (15.2 m) | - |
| Generac MCP5411-3 | 54% | - | 50 ft (15.2 m) | - |
| Generac MCP5437 | 54% | - | 50 ft (15.2 m) | - |
Documents
Full specifications
| Casing | Stainless Steel | ↗ |
| Commercial Warranty | 1 year | ↗ |
| Cord length (feet) | 20 | ↗ |
| Cord type | Heavy- | ↗ |
| Dimensions (WxH) | 6.4" x 10.3" | ↗ |
| Discharge | Type Top | ↗ |
| Discharge capacity | 40 gpm | ↗ |
| Dry weight | 11 lbs. | ↗ |
| Duty | Continuous | ↗ |
| Impeller | Thermo Plastic Noryl | ↗ |
| Max. head (feet) | 23 | ↗ |
| Maximum pressure | 10 psi | ↗ |
| Motor (HP) | 1/3 | ↗ |
| Motor insulation | Class F | ↗ |
| Overhead protection | Built-In Thermal Automatic Reset | ↗ |
| Port diameter ( inches) | 1.25 FNPT | ↗ |
| Pump Type | Submersible Standard | ↗ |
| Pump diameter | 6.4" | ↗ |
| Residential Warranty | 1 year | ↗ |
| Running amps | 4 | ↗ |
| Seals | Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal | ↗ |
| Solids handling | 0.375" | ↗ |
| Starting Type | Automatic | ↗ |
| Starting amps | 10 | ↗ |
| Voltage | 115 | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →