Honda
WT20
185 gpm
Flow rate
85 ft (25.9 m)
Max head
104 lb (47 kg)
Operating weight
710 L/min
discharge capacity max
2 in (50.8 mm)
discharge port diameter
163 cm3
engine displacement
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | Operating weight |
|---|---|---|---|---|
| Magnum MTP200 | 96% | 185 gpm | 92 ft (28.0 m) | - |
| Ironton 750131 | 96% | 176 gpm | 82 ft (25.0 m) | - |
| Multiquip MVH120GH | 93% | - | - | - |
| Magnum MDP200 | 85% | 137 gpm | 105 ft (32.0 m) | - |
| Sykes D75 | 82% | 260 gpm | 78.7 ft (24.0 m) | - |
| Generac MDWP | 79% | - | 50 ft (15.2 m) | - |
Documents
Full specifications
| Bore and stroke | 2.7" x 1.8" | ↗ |
| Commercial Warranty | 12 months | ↗ |
| Compression Ratio | 9.0:1 | ↗ |
| Dimensions (LxWxH) | 24.4" x 18.1" x 18.3" | ↗ |
| Discharge capacity | 185 gal/min | ↗ |
| Discharge port diameter | 2" | ↗ |
| Displacement | 163 cc | ↗ |
| Drive system | Direct | ↗ |
| Dry weight | 104 lbs. | ↗ |
| Engine | GX160 | ↗ |
| Fuel Capacity | 0.82 gal | ↗ |
| Impeller | Conical Cast Iron | ↗ |
| Maximum pressure | 37 psi | ↗ |
| Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide | ↗ |
| Oil Alert | Std | ↗ |
| Priming time | 60 sec. @ 16.4 ft. | ↗ |
| Pump Type | Trash Centrifugal Self-priming | ↗ |
| Residential Warranty | 24 months | ↗ |
| Run Time @ Max Discharge | 1.5 hr | ↗ |
| Solids handling | 13/16 inches | ↗ |
| Strainer Part # | 78325-YG0-003 | ↗ |
| Suction head lift | 26 ft. | ↗ |
| Suction port diameter | 2" | ↗ |
| Total head lift | 85 ft. | ↗ |
| Volute | Rigid Mounted Cast Iron w/ Stainless Wear Plate | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →