Honda
WX15
74 gpm
Flow rate
121 ft (36.9 m)
Max head
1.5 in (38.1 mm)
discharge port diameter
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head | discharge port diameter |
|---|---|---|---|---|
| Ebara CDX | 90% | 66 gpm | 134 ft (41.0 m) | - |
| Magnum MDP200 | 72% | 137 gpm | 105 ft (32.0 m) | 2 in (50.8 mm) |
| Allegro 9404-02 Standard Dewatering Pump | 65% | 64 gpm | 39.5 ft (12.0 m) | 2 in (50.8 mm) |
| Ebara 2CDX | 62% | 55 gpm | 246 ft (75.0 m) | - |
| Pentair Myers QP50B 5 HP Quick Prime Self-Priming Centrifugal Pump | 62% | 134 gpm | 178 ft (54.3 m) | - |
| Ebara Matrix | 60% | 119 gpm | 212 ft (64.5 m) | - |
Documents
Full specifications
| Bore and stroke | 1.65" x 1.42" | ↗ |
| Commercial Warranty | 1 year | ↗ |
| Compression Ratio | 8.0:1 | ↗ |
| Dimensions (LxWxH) | 14.0"x10.8"x14.8" | ↗ |
| Discharge capacity | 74 gal/min | ↗ |
| Discharge port diameter | 1.5" NPT | ↗ |
| Displacement | 49cc | ↗ |
| Drive system | Direct | ↗ |
| Dry weight | 20 lb. | ↗ |
| Engine | GXH50 | ↗ |
| Fuel Capacity | 0.20 gal | ↗ |
| Impeller | Aluminum | ↗ |
| Maximum pressure | 52 psi | ↗ |
| Mechanical Seal (Pump case / impeller) | Carbon/Ceramic | ↗ |
| Oil Alert | Std | ↗ |
| Priming time | 120 sec. at 16.4 ft. | ↗ |
| Pump Type | General purpose Centrifugal Self-priming | ↗ |
| Residential Warranty | 2 years | ↗ |
| Run Time @ Max Discharge | 0.9 hr | ↗ |
| Solids handling | N/A | ↗ |
| Strainer Part # | 78325-YB0-751 | ↗ |
| Suction head lift | 26 ft. | ↗ |
| Suction port diameter | 1.5" NPT | ↗ |
| Total head lift | 121 ft. | ↗ |
| Volute | Aluminum | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →