Hydromatic
HS33V1/HS33T1/HS50V1/HS50T1
75 gpm
Flow rate
25 ft (7.6 m)
Max head
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Flow rate | Max head |
|---|---|---|---|
| BJM Pumps SV400 | 97% | 70 gpm | 25 ft (7.6 m) |
| Ebara RIGHT | 84% | 79 gpm | 34.4 ft (10.5 m) |
| Grundfos Sololift2 C-3 | 84% | 54 gpm | 26.2 ft (8.0 m) |
| BJM Pumps ALPHA V 2M | 82% | 65 gpm | 32 ft (9.8 m) |
| BJM Pumps GF32-9 | 80% | 45 gpm | 25 ft (7.6 m) |
| BJM Pumps RX750SS | 78% | 70 gpm | 40 ft (12.2 m) |
Documents
Full specifications
| Discharge Size | 1-1/2 in NPT | ↗ |
| Float Switch Type | Wide-angle tethered or vertical mechanical | ↗ |
| Full Load Amps (1/2 HP) | 4.1 A | ↗ |
| Full Load Amps (1/3 HP) | 3.9 A | ↗ |
| Horsepower | 1/3 or 1/2 HP | ↗ |
| Max Capacity | 75 GPM | ↗ |
| Max Liquid Temperature | 140 °F | ↗ |
| Min Sump Diameter (vertical float) | 10 in (25.4 cm) | ↗ |
| Motor Housing Material | Zinc | ↗ |
| Phase | 1 | ↗ |
| Power Cord | 8 ft (2.4 m) | ↗ |
| RPM | 3450 RPM | ↗ |
| Shaft Seal | Double lip | ↗ |
| Shut-Off Head | 25 ft (7.6 m) | ↗ |
| Solids Handling | 1/4 in | ↗ |
| Voltage | 115 V | ↗ |
| Volute Case Material | Cast Iron | ↗ |
| pH Range | 6-9 | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →