Takeuchi
TL6R
65 hp
Engine power
7,485 lb (3,395 kg)
Operating weight
67.4 Lpm
auxiliary hydraulic flow
76 L
fuel tank capacity
1,841 lb (835 kg)
lift capacity
10 km/h
max travel speed
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight | auxiliary hydraulic flow |
|---|---|---|---|---|
| Asv RT-65-1C | 98% | 67 hp | 7,405 lb (3,359 kg) | - |
| Mustang 1950RT | 97% | 69 hp | 7,544 lb (3,422 kg) | - |
| Gehl RT165 | 94% | 69 hp | 8,020 lb (3,638 kg) | - |
| Kubota SVL65-2 | 94% | 68 hp | 8,135 lb (3,690 kg) | - |
| Mustang 1650RT | 94% | 68 hp | 8,020 lb (3,638 kg) | - |
| Asv VT-75-1C | 93% | 72 hp | 7,915 lb (3,590 kg) | - |
Documents
Full specifications
| ENGINE - Horsepower @ 2,700 rpm | 65.2 (48.6 kW) hp | ↗ |
| ENGINE - Make / Model | Kubota / V2403-CR-TE4B | ↗ |
| ENGINE - Maximum Torque @ 1,500 rpm | 144.3 (195.6 Nm) ft-lb | ↗ |
| Engine Displacement | 148.5 (2.4 L) cu in | ↗ |
| FLUID CAPACITIES - Cooling System | 14.0 (13.0 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 7.6 (7.2 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 2.69 (10.2 L /hr) gal/hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 20.0 (75.7 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 7.9 (30.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic System Capacity | 13.5 (51.0 L) gal | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 17.8 (67.4 Lpm) gpm | ↗ |
| Hydraulic System Pressure | 2,988 (20.6 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Clearance Circle Rear | 4 (1,520 mm) ft 11.8 in | ↗ |
| MACHINE DIMENSIONS - Clearance Circle with Bucket | 6 (2,095 mm) ft 10.5 in | ↗ |
| MACHINE DIMENSIONS - Clearance Circle without Bucket | 4 (1,395 mm) ft 6.9 in | ↗ |
| MACHINE DIMENSIONS - Departure Angle | 30 ° | ↗ |
| MACHINE DIMENSIONS - Dump Angle | 38 ° | ↗ |
| MACHINE DIMENSIONS - Dump Height Fully Raised | 7 (2,275 mm) ft 5.6 in | ↗ |
| MACHINE DIMENSIONS - Dump Reach Fully Raised | 1 (560 mm) ft 10.0 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 9.1 (230 mm) in | ↗ |
| MACHINE DIMENSIONS - Machine Length | 8 (2,689 mm) ft 9.9 in | ↗ |
| MACHINE DIMENSIONS - Max. Lift Height to Bucket Pin | 9 (2,905 mm) ft 6.4 in | ↗ |
| MACHINE DIMENSIONS - Overall Width without Bucket | 5 (1,530 mm) ft 0.2 in | ↗ |
| MACHINE DIMENSIONS - Rollback Angle | 31 ° | ↗ |
| MACHINE DIMENSIONS - Track Ground Contact Length | 4 (1,395 mm) ft 6.9 in | ↗ |
| MACHINE DIMENSIONS - Track Width | 12.6 (320 mm) in | ↗ |
| MACHINE DIMENSIONS - Transport Height | 6 (1,975 mm) ft 5.8 in | ↗ |
| MACHINE DIMENSIONS - Transport Length | 10 (3,330 mm) ft 11.1 in | ↗ |
| OPERATING PERFORMANCE - Bucket Breakout Force | 5,930 (2,690 kg) lb | ↗ |
| OPERATING PERFORMANCE - Ground Pressure - 12.6" Track | 5.1 (34.8 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Lift Arm Breakout Force | 4,860 (2,205 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Capacity w/ Opt Counterweight | 2,041 (925 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Load at 50% of Tipping Load | 2,635 (1,195 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Cab | 7,780 (3,530 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Canopy | 7,485 (3,395 kg) lb | ↗ |
| OPERATING PERFORMANCE - Rated Operating Capacity, SAE J818* | 1,841 (835 kg) lb | ↗ |
| OPERATING PERFORMANCE - Tipping Load | 5,269 (2,390 kg) lb | ↗ |
| OPERATING PERFORMANCE - Traction Force | 8,655 (3,926 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High | 6.2 (10.0 km/hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low | 4.3 (7.0 km/hr) mph | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →