Vermeer
ML130 Mini Loader
40 hp
Engine power
3,699 lb (1,678 kg)
Operating weight
63.6 L/min
auxiliary high flow
49.2 L
fuel tank capacity
210 bar
hydraulic system pressure
1,270 lb (576 kg)
lift capacity
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight | auxiliary high flow |
|---|---|---|---|---|
| Ditch Witch ST37X Stand-On Trencher | 88% | 37 hp | 4,109 lb (1,864 kg) | - |
| Ditch Witch SK1750 Mini Skid Steer | 85% | 44 hp | 4,709 lb (2,136 kg) | - |
| Ditch Witch SK800 Mini Skid Steer | 73% | 25 hp | 2,919 lb (1,324 kg) | - |
| Ditch Witch Zahn Tool Carrier | 57% | 27 hp | 1,290 lb (585 kg) | - |
Documents
Full specifications
| Auxiliary High Flow | 16.8 gpm | ↗ |
| Auxiliary Low Flow | 9.4 gpm | ↗ |
| Cooling System | Liquid | ↗ |
| Fuel Tank Capacity | 13 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Gross Horsepower | 40 hp | ↗ |
| Ground Clearance | 7 in (17.8 cm) | ↗ |
| Ground Pressure | 4.5 psi | ↗ |
| Height | 59 in (150 cm) | ↗ |
| High Idle | 2600 rpm | ↗ |
| Hinge Pin Height | 88 in (224 cm) | ↗ |
| Hydraulic System Pressure | 3045 psi | ↗ |
| Length | 89.5 in (227 cm) | ↗ |
| Lift/Curl | Single pilot-operated joystick | ↗ |
| Make | Rehlko | ↗ |
| Max Torque | 125.4 ft-lb (170 Nm) at 1,500 rpm | ↗ |
| Max Travel Speed | 4.4 mph | ↗ |
| Max Travel Speed (Forward) | 4.4 mph | ↗ |
| Max Travel Speed (Reverse) | 3.1 mph | ↗ |
| Maximum Angle of Inclination | 30 deg | ↗ |
| Model | 1903 KDI-TCR | ↗ |
| Rated Operating Capacity (SAE) | 1,270 lbs (576 kg) | ↗ |
| Steering | Single pilot-operated joystick | ↗ |
| Transmission | Tandem direct-drive pumps | ↗ |
| Weight | 3,700 lbs (1,678 kg) | ↗ |
| Width | 42 in (107 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →