Skip to content
Heyquip Heyquip Catalog
Catalog / Earthmoving / Loaders / Mini Skid Steer
Vermeer

ML80 Mini Loader

25 hp
Engine power
3,159 lb (1,433 kg)
Operating weight
45.8 L/min
auxiliary high flow
49.2 L
fuel tank capacity
210 bar
hydraulic system pressure
780 lb (354 kg)
lift capacity

Equivalent across brands

Compare side by side →

Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.

ModelMatchEngine powerOperating weightauxiliary high flow
Ditch Witch SK800 Mini Skid Steer 90% 25 hp2,919 lb (1,324 kg)-
Ditch Witch ST37X Stand-On Trencher 75% 37 hp4,109 lb (1,864 kg)-
Ditch Witch Zahn Tool Carrier 67% 27 hp1,290 lb (585 kg)-
Ditch Witch SK1750 Mini Skid Steer 62% 44 hp4,709 lb (2,136 kg)-

Documents

Datasheet ↓
Official ✓ Verified source Jul 2026

Full specifications

Auxiliary High Flow12.1 gpm ↗
Auxiliary Low Flow5.2 gpm ↗
Cooling SystemLiquid ↗
Fuel Tank Capacity13 gal ↗
Fuel TypeDiesel ↗
Gross Horsepower24.7 hp ↗
Ground Clearance6 in (15.2 cm) ↗
Ground Pressure (Narrow Tracks)4.9 psi ↗
Ground Pressure (Wide Tracks)3.8 psi ↗
Height58 in (147 cm) ↗
High Idle2400 rpm ↗
Hinge Pin Height84.5 in (215 cm) ↗
Hydraulic System Pressure3045 psi ↗
Length84 in (213 cm) ↗
Lift/CurlSingle pilot-operated joystick ↗
MakeRehlko ↗
Max Torque66 ft-lb (89 Nm) at 1,800 rpm ↗
Max Travel Speed4.2 mph ↗
Max Travel Speed (Forward)4.2 mph ↗
Max Travel Speed (Reverse)3.1 mph ↗
Maximum Angle of Inclination35 deg ↗
Model1403 KSD-NA ↗
Rated Operating Capacity (SAE)780 lbs (354 kg) ↗
SteeringSingle pilot-operated joystick ↗
Tank Fill Capacity8.9 gal ↗
TransmissionTandem direct-drive pumps ↗
Weight (Wide Tracks)3,160 lbs (1,433 kg) ↗
Width (Narrow Tracks)36 in (91.4 cm) ↗
Width (Wide Tracks)40 in (102 cm) ↗

Every figure is traced to the manufacturer’s published data. ↗ opens the source.

Export for Heyquip

Populate your Heyquip store's product page with this model's specs, images, and cited documents.

Is this your equipment? Verify your specs →

Sources

← All Mini Skid Steer

Admin Open in admin →

Fix classification