Vermeer
SC48TX Stump Cutter
48 hp
Engine power
14.5 gal
Fuel capacity
3,748 lb (1,700 kg)
Operating weight
24.0 in (61 cm)
cutter wheel diameter
16.0 in (40.6 cm)
cutting depth
28.0 in (71.1 cm)
cutting height
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit Model 2550 (Track) | 80% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2550 (Rubber Tire) | 78% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit SG-75W | 76% | 74 hp | - | 4,321 lb (1,960 kg) |
| Bandit Model 3100 (Towable) | 67% | 74 hp | - | 5,461 lb (2,477 kg) |
| Toro STX-38 Stump Grinder | 63% | 38 hp | - | 1,750 lb (794 kg) |
| Bandit SG-40 | 61% | 38 hp | - | 1,499 lb (680 kg) |
Documents
Full specifications
| Air Cleaner | Dry-type, restriction indicator, evacuator valve and safety element | ↗ |
| Alternator | 85 A | ↗ |
| Battery | 950 CCA | ↗ |
| Blade Travel Above Ground | 8.5 in (21.6 cm) | ↗ |
| Brake Type | Spring-applied and hydraulically-released dual parking brakes | ↗ |
| Chip Containment | 23 cu ft | ↗ |
| Chip blade width (without extensions) | 34 in (86.4 cm) | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Swing out | ↗ |
| Controller | Danfoss | ↗ |
| Coolant Capacity (Engine and Radiator) | 2.9 gal | ↗ |
| Cooling Medium | Water/antifreeze | ↗ |
| Cutterwheel Cut Above Ground | 28 in (71.1 cm) | ↗ |
| Cutterwheel Cut Below Ground | 16 in (40.6 cm) | ↗ |
| Cutterwheel Diameter | 24 in (61.0 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Speed | 1235 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 65 in (165 cm) | ↗ |
| Cutterwheel Thickness | 1.4 in (35.6 mm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status | ↗ |
| Driveshaft | 2 universal joints | ↗ |
| Driveshaft - U Joints | 2 standard with double lip seal | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 16.5 in (41.9 cm) | ↗ |
| Filtration Method | Full-flow 4-micron return filter, suction strainer | ↗ |
| Frame Description | Welded tube and plate steel | ↗ |
| Fuel Tank Capacity | 14.5 gal | ↗ |
| Fuel Type | Ultra-low sulfur diesel | ↗ |
| Gross Horsepower (Maximum) | 48 hp | ↗ |
| Ground Bearing Pressure - Soft Ground | 5.7 psi | ↗ |
| Height (non-remote unit) | 76 in (193 cm) | ↗ |
| Height (remote unit) | 85 in (216 cm) | ↗ |
| High Speed Travel | 140 ft/min | ↗ |
| Length | 140 in (356 cm) | ↗ |
| Low Speed Travel | 100 ft/min | ↗ |
| Lower Gearbox | Straight bevel | ↗ |
| Make and Model | CAT C1.7 T4F/Stage V | ↗ |
| Max Fuel Consumption | 2.9 gph | ↗ |
| Maximum Angle of Continuous Operation | 35 deg | ↗ |
| Number of Cylinders | 3 | ↗ |
| Number of Idlers | 7 | ↗ |
| Number of Teeth | 27 | ↗ |
| Number of wear plates | 6 | ↗ |
| Oil Capacity - Lower Gearbox | 1.6 qt | ↗ |
| Oil Cooler | Yes | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil | ↗ |
| Oil Volume with Filter | 5.3 qt | ↗ |
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate | ↗ |
| Preventive Maintenance | Optional | ↗ |
| Pump Flow at Maximum RPM | 11 gpm | ↗ |
| Radio Remote Control | Optional | ↗ |
| Recommended Oil | 10 W-30 | ↗ |
| Recommended Oil Type | Vermeer highpower 68 | ↗ |
| Remote Display | LCD with remote control and machine functions status | ↗ |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode and track speed range | ↗ |
| Remote Range | 300 ft (91.4 m) | ↗ |
| Reversible Pockets/Teeth | 24 | ↗ |
| Shutdown System | High engine temperature and low oil pressure | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →