Vermeer
SC70TX Stump Cutter
67 hp
Engine power
12.0 gal
Fuel capacity
3,900 lb (1,769 kg)
Operating weight
27.0 in (68.6 cm)
cutter wheel cut above ground
16.0 in (40.6 cm)
cutter wheel cut below ground
23.0 in (58.4 cm)
cutter wheel diameter
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit SG-75W | 90% | 74 hp | - | 4,321 lb (1,960 kg) |
| Bandit Model 3100 (Towable) | 81% | 74 hp | - | 5,461 lb (2,477 kg) |
| Bandit Model 2550 (Track) | 74% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2550 (Rubber Tire) | 68% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2900 (Track) | 61% | 120 hp | - | 5,919 lb (2,685 kg) |
| Bandit SG-40 | 58% | 38 hp | - | 1,499 lb (680 kg) |
Documents
Full specifications
| Air Cleaner | Dry-type, restriction indicator, evacuator valve, safety element | ↗ |
| Alternator | 85 A | ↗ |
| Battery | 950 CCA | ↗ |
| Brake Type | Spring-applied and hydraulically released dual parking brakes | ↗ |
| Chip Containment | 23 cu ft | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Swing-out | ↗ |
| Controller | Vermeer C248 with SmartSweep | ↗ |
| Coolant Capacity (Engine and Radiator) | 2.9 gal | ↗ |
| Cooling Medium | Water/Antifreeze | ↗ |
| Cutterwheel Cut Above Ground | 27 in (68.6 cm) | ↗ |
| Cutterwheel Cut Below Ground | 16 in (40.6 cm) | ↗ |
| Cutterwheel Diameter | 23 in (58.4 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Speed | 948 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 65 in (165 cm) | ↗ |
| Cutterwheel Thickness | 1.1 in (27.9 mm) | ↗ |
| Description | Yes | ↗ |
| Directional Control | Yes | ↗ |
| Display | Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status | ↗ |
| Driveshaft | 2 universal joints | ↗ |
| Driveshaft - U Joints | Two standard with double lip seal | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 16.5 in (40.7 cm) | ↗ |
| Filtration Method | Full-flow 4 micron return filter, suction strainer | ↗ |
| Flow Control | Yes | ↗ |
| Fuel Tank Capacity | 12 gal | ↗ |
| Fuel Type | Ultra-low sulfur diesel | ↗ |
| Gross Horsepower (Maximum) | 67 hp | ↗ |
| Ground Bearing Pressure - Soft Ground | 4.3 psi | ↗ |
| Height | 72 in (183 cm) | ↗ |
| High Speed Travel | 1.6 mph | ↗ |
| Length | 142 in (360 cm) | ↗ |
| Low Speed Travel | .7 mph | ↗ |
| Lower Gearbox | Straight bevel | ↗ |
| Make and Model | CAT C2.2 turbocharged Tier 4 final/Stage V Diesel | ↗ |
| Max Fuel Consumption | 3.8 gph | ↗ |
| Number of Idlers | 10 | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 30 | ↗ |
| Number of Teeth | 30 | ↗ |
| Oil Capacity | 1.7 qt | ↗ |
| Oil Capacity - Lower Gearbox | 2.2 qt | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Type | SAE 75W90 synthetic gear oil | ↗ |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil | ↗ |
| Oil Volume with Filter | 8.5 qt | ↗ |
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate | ↗ |
| Preventive Maintenance | Optional | ↗ |
| Pump Flow at Maximum RPM | 9 gpm | ↗ |
| Quantity/Location | 2 | ↗ |
| Radio Remote Control | Optional | ↗ |
| Recommended Oil | 10 W-30 | ↗ |
| Recommended Oil Type | Vermeer Hypower 68 | ↗ |
| Remote Display | LCD with remote control and machine functions status | ↗ |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode, track speed range, SmartSweep | ↗ |
| Reversible Pockets/Teeth | 30 | ↗ |
| Sensor Type | Capacitive | ↗ |
| Shutdown System | High engine temperature and low oil pressure | ↗ |
| Special Paint | Optional | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →