Vermeer
SC852 Stump Cutter
74 hp
Engine power
13.5 gal
Fuel capacity
4,460 lb (2,023 kg)
Operating weight
72.0 in (183 cm)
cutter wheel straight line dimension
25 in (63.5 cm)
cutting depth below ground
31.0 in (78.7 cm)
cutting height above ground
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit SG-75W | 98% | 74 hp | - | 4,321 lb (1,960 kg) |
| Bandit Model 3100 (Towable) | 91% | 74 hp | - | 5,461 lb (2,477 kg) |
| Bandit Model 2900 (Track) | 73% | 120 hp | - | 5,320 lb (2,413 kg) |
| Bandit Model 2550 (Rubber Tire) | 70% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2550 (Track) | 62% | 49 hp | - | 2,560 lb (1,161 kg) |
| Bandit SG-40 | 47% | 40 hp | - | 1,499 lb (680 kg) |
Documents
Full specifications
| Air Cleaner | Two-stage dry type with maintenance-free precleaner, restriction indicator, evacuator valve and safety element | ↗ |
| Alternator | 95 Amp | ↗ |
| Axle/Suspension | Rigid at dual drive wheels; oscillating front steerable axle | ↗ |
| Battery | 950 CCA | ↗ |
| Blade Travel Above Ground | 14 in (35.6 cm) | ↗ |
| Brake Type | Spring applied, hydraulic release at planetary drives | ↗ |
| Chip Blade Dimension | Standard feature, 34 inches wide, 13.75 inches tall | ↗ |
| Chip Containment | 28.2 cu ft | ↗ |
| Clutch Type | Hydrostatic Transmission | ↗ |
| Control Station Description | Abrasion resistant coated polycarbonate, 3/16 inch thick | ↗ |
| Controller | Vermeer ACS | ↗ |
| Coolant Capacity (Engine and Radiator) | 3.9 gal | ↗ |
| Cooling Medium | Water / anti-freeze | ↗ |
| Cutterwheel Cut Above Ground | 31 in (78.7 cm) | ↗ |
| Cutterwheel Cut Below Ground | 25 in (63.5 cm) | ↗ |
| Cutterwheel Diameter | 23 in (58.4 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Speed | 930 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 72 in (183 cm) | ↗ |
| Cutterwheel Thickness | 1.1 in (27.9 mm) | ↗ |
| Directional Control | Electric over hydraulic | ↗ |
| Driveshaft | Standard | ↗ |
| Driveshaft - U Joints | 2 Standard w/ double lip seals | ↗ |
| Extended Warranty | 2 year/2000 hour or 3 year/3000 hour | ↗ |
| Fan | Remote variable speed suction | ↗ |
| Filtration Method | Suction strainers and 3 micron return filter | ↗ |
| Frame Description | Swing out control station with 3 available positions plus auxiliary control station | ↗ |
| Fuel Tank Capacity | 13.5 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Gross Horsepower (Maximum) | 74 hp | ↗ |
| Height | 80 in (203 cm) | ↗ |
| High Speed Travel | 130 ft/min | ↗ |
| Length | 147 in (373 cm) | ↗ |
| Low Speed Travel | 60 ft/min | ↗ |
| Lower Gearbox | 90 Degree | ↗ |
| Make and Model | Deutz TD2.9L Tier Four Final | ↗ |
| Max Fuel Consumption | 3.9 gph | ↗ |
| Maximum Angle of Continuous Operation | 20 deg | ↗ |
| Number of Cylinders | 4 | ↗ |
| Number of Indexes | 2 per tooth | ↗ |
| Number of Pockets | 26 | ↗ |
| Number of Teeth | 26 | ↗ |
| Oil Capacity - Lower Gearbox | 2.7 qt | ↗ |
| Oil Cooler | Standard | ↗ |
| Oil Filter | Spin on | ↗ |
| Oil Type - Lower Gearbox | Syn 75W90 | ↗ |
| Oil Volume with Filter | 6.8 qt | ↗ |
| Operator Vision Shield Description | None | ↗ |
| Overall Width Transport (with duals) | 56 in (142 cm) | ↗ |
| Overall Width Transport (without duals) | 35 in (88.9 cm) | ↗ |
| Preventive Maintenance | Optional | ↗ |
| Pump Flow at Maximum RPM | 15.8 gpm | ↗ |
| Radio Remote Control | Optional | ↗ |
| Recommended Oil | 15 W40 | ↗ |
| Recommended Oil Type | Vermeer HyPower 68 | ↗ |
| Remote Display | LED | ↗ |
| Remote Functions | Engine start/stop, throttle, cutter wheel engage, swing, raise/lower | ↗ |
| Remote Range | 300' | ↗ |
| Reversible Pockets/Teeth | Yes - Standard | ↗ |
| Shutdown System | High coolant or hyd oil temp, low oil pressure | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →