Vermeer
Verifier G1 Utility Locator
82.2 kHz
active frequency
16.4 ft (5 m)
depth range
1 watt
output power
54 IP
protection grade
30 hours
receiver battery life
2.4 lb (1.1 kg)
receiver weight
Documents
Full specifications
| Active frequencies | 82.2 kHz +/- 20 Hz | ↗ |
| Audio indication | Internal speaker: alarm and beeping sounds | ↗ |
| Audio output | Internal speaker with volume adjustor | ↗ |
| Battery Type | Six alkaline LR20 D | ↗ |
| Battery life | Direct mode: 50 hours - output 4 mA, 68°F (20°C); Inductive mode: 20 hours - output 50%, 68°F (20°C); Full power: (1 W): 2 hours, 68°F (20°C) | ↗ |
| Battery status | Low battery indication and press key readout | ↗ |
| Current value | Current value showing on the conductor is displayed for line identity in millilamps (mA) | ↗ |
| Depth accuracy | 6.5 ft (2 m): ±2.5%, 10 ft (3 m): ±5%, 16.5 ft (5 m): ±10% | ↗ |
| Depth display | High precision depth measurement | ↗ |
| Depth readout unit | Feet, meter and inch | ↗ |
| Dimensions | 9.61 in x 12.4 in x 3.62 in (24 cm x 31.5 cm x 9.2 cm) | ↗ |
| Interface | 6-pin output connector | ↗ |
| Measuring function | Output current: 0 mA - 300 mA, line voltage: 0 V to 250 V | ↗ |
| Operating modes | Direct connection mode, inductive mode and external coil clamp mode | ↗ |
| Operating temperature | 4°F - 122°F (-20°C - 50°C) | ↗ |
| Output frequencies | 82.175 kHz +/- .02% | ↗ |
| Output power | 1 watt maximum | ↗ |
| Output protection | AC 250 V | ↗ |
| Power save function | Automatic power off after 6 minutes of inactivity | ↗ |
| Range | Line: 0 ft - 16 ft (0 m - 5 m) | ↗ |
| Visual indication | Internal speaker: alarm and beeping sounds | ↗ |
| Weight | 5.8 lb (2.6 kg) including six batteries | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →