CAT CLASS: HQ-10107

30-40 in Walk-Behind Power Trowel

The 30–40 in walk-behind power trowel is the industry standard for residential and light commercial concrete finishing. With blade diameters between 30 and 39 inches and engines from 5.5 to 9 hp, this size handles garages, basements, and most residential slabs. It sits in the middle of the walk-behind ladder, offering more productivity than sub-30 in models while remaining maneuverable in constrained spaces.

111

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Trowel width	30–39 in (76.2–99.1 cm)	The diameter swept by the blade assembly; determines finish area per pass.
Engine power	5.5–9.0 hp	Gasoline engine output; higher horsepower supports faster blade speed and harder concrete.
Blade configuration	4-blade or 5-blade	Number of individual trowel blades; more blades increase finish smoothness.

Cómo elegir

The 30–40 in walk-behind is the correct choice for typical residential slabs, garage floors, basement pours, and small commercial interiors where standard door openings and moderate square footage define the workspace. When floor area drops below 500 sq ft or doorways and hallways severely restrict access, the Up to 30 in Walk-Behind Power Trowel offers tighter maneuverability. For large commercial slabs, warehouse floors, or any pour exceeding 2,000 sq ft, the 40+ in Walk-Behind Power Trowel delivers faster coverage and reduces operator fatigue on extended runs.

Lo que maneja este tamaño

Two-car garage slabs and residential driveways
Basement floors and ground-level slabs in single-family construction
Small retail interiors and office tenant improvements
Sidewalks and pedestrian walkways up to 6 ft wide
Patios and exterior flatwork in residential settings
Light industrial shop floors under 2,000 sq ft

Seguridad y operación

Blade guards and operator presence controls are standard to prevent contact with rotating blades
Machines generate significant torque; operators must maintain firm grip and stable footing on wet concrete
Exhaust fumes require adequate ventilation when operating indoors or in enclosed spaces
Blade pitch adjustments must be made only when the engine is off and blades have stopped rotating

Transporte y logística

Fits in pickup beds and standard utility trailers without disassembly
Typical unit weight of 100–180 lb allows two-person manual loading with ramps
Foldable or removable handles on most models reduce transport height

Alimentación

Gasoline-powered engines; requires pre-mixed fuel or straight gasoline depending on engine type
Fuel tank capacity typically 0.5–1.5 gallons, sufficient for 2–4 hours of continuous operation
No external electrical or hydraulic connections required on site

Preguntas frecuentes

What blade diameter is most common in this size class?

Models with 36 in blade diameter dominate the 30–40 in class, balancing finish area with maneuverability through standard 36 in doorways.

How does engine power affect troweling performance?

Higher horsepower (8–9 hp) maintains blade speed under load on harder concrete mixes and allows operators to apply more downward pressure during the burnishing phase without stalling the engine.

When should finishing blades be replaced with combination blades?

Combination blades are installed during the float stage when the concrete is still workable; finishing blades replace them once the surface can support the machine weight and a smooth, dense finish is required.

Comparar modelos populares

Buscar por especificación →

Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.

Modelo	Potencia del motor	Peso operativo
Multiquip J3036H55	-	168 lb (76 kg)
Multiquip J36E2	-	165 lb (75 kg)
Multiquip JH55C	-	-
Allen Engineering PRO436	6 hp	-
Allen Engineering PRO436E	9 hp	-
Allen Engineering PRO436TC	9 hp	-