CAT CLASS: HQ-10166

9-15 ton Carry Deck Crane

The 9-15 ton carry deck crane is the workhorse of industrial maintenance and construction in confined spaces. With lifting capacities from 8.2 to 13.6 tons and maximum reach extending to 69.5 feet, this size class handles the majority of refinery turnarounds, pipe rack work, and equipment changeouts where maneuvering room is limited. It sits between the lighter up to 9 ton class and the heavier-duty 15+ ton machines.

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Lifting capacity	8–14 tons	Maximum load the crane can lift at minimum radius, governs which equipment and structural components the machine can handle
Maximum reach	30–70 feet	Horizontal distance from centerline of rotation to load hook at full boom extension, determines whether the crane can access elevated or setback work areas
Deck capacity	Varies by model	Weight the carry deck can transport while traveling, allowing the crane to move loads short distances without rigging down

Cómo elegir

This size is appropriate when work requires repeated lifts of machinery, valve assemblies, or piping bundles in the 5–12 ton range within industrial plants where aisle width and ceiling clearance restrict larger equipment. The up to 9 ton carry deck crane is the better choice for HVAC replacements, small mechanical work, and lighter industrial tasks where capacity below 8 tons is sufficient and a more compact footprint aids navigation. The 15+ ton carry deck crane becomes necessary when lifting capacity must exceed 13 tons, when reach beyond 70 feet is required, or when handling heavy process equipment and structural steel that exceeds the safe working limits of this mid-range class.

Lo que maneja este tamaño

Turnaround work in petrochemical units with narrow pipe racks
Heat exchanger bundle pulls in refineries
Motor and pump replacements in industrial facilities
Valve and actuator installs on elevated platforms
Compressor component changeouts in confined machinery areas
Piping module placement in congested process units

Seguridad y operación

Load charts must account for boom angle, extension, and whether the crane is operating on outriggers or traveling with load on deck
Ground bearing pressure and surface condition determine maximum safe lifting capacity in many industrial settings with grated floors or asphalt paving
Overhead clearance calculations critical in process units with cable trays, piping, and structural steel at multiple elevations
Operators must verify that traveling with a load on the deck does not exceed manufacturer-specified deck capacity and travel speed limits

Transporte y logística

Most models transport on standard flatbed or step-deck trailers without requiring permits for width or weight in many jurisdictions
Self-loading capability uncommon; typically requires forklift, crane, or hydraulic ramps at origin and destination
Compact wheelbases allow maneuvering through standard industrial gates and between closely spaced structures

Alimentación

Diesel-powered with onboard fuel tanks sized for multi-shift operation without refueling
Four-wheel drive and all-wheel steer standard on most models, enabling operation on graded industrial yards and unpaved maintenance roads
No external electrical connection required for operation

Preguntas frecuentes

What distinguishes a 9-15 ton carry deck crane from a similarly rated rough terrain crane?

The carry deck crane offers a load-bearing deck that allows it to pick, carry, and set loads while traveling through tight spaces, whereas rough terrain cranes typically require more setup area and cannot transport loads on the chassis. The carry deck's compact footprint and four-wheel steering make it suited to congested industrial plants.

How does reach vary across this capacity range?

Maximum reach spans from 30 feet on compact 8-ton models to nearly 70 feet on extended-boom 13-ton configurations. The specific combination of capacity and reach depends on the manufacturer's boom design and whether hydraulic or manual extensions are employed.

Can this size class operate indoors?

Many models in this class can operate in large industrial buildings provided ceiling height accommodates the boom, floor loading supports the crane's weight and outrigger forces, and ventilation manages diesel exhaust. Some manufacturers offer Tier 4 Final engines that reduce emissions in enclosed or semi-enclosed spaces.

Comparar modelos populares

Buscar por especificación →

Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.

Modelo	Capacidad de elevación	Alcance máx
Broderson IC-80	17,637 lb (8 t)	30 ft (9.1 m)
Broderson IC-200	30,865 lb (14 t)	50 ft (15.2 m)
Broderson IC-200-2SJ	30,865 lb (14 t)	50 ft (15.2 m)
Broderson IC-200-2SJ 4X4	30,865 lb (14 t)	50 ft (15.2 m)
Grove GCD09	17,637 lb (8 t)	48 ft (14.6 m)
Grove GCD15	30,865 lb (14 t)	69.5 ft (21.2 m)