CAT CLASS: HQ-10649

160+ ft Telescopic Boom Lift

The 160+ ft telescopic boom lift class represents the tallest self-propelled aerial work platforms manufactured, with working heights from 56.9 ft to 216 ft. These ultra-high-reach machines—offered by JLG, Genie, Snorkel, and XCMG—serve specialized applications where scaffolding, cranes, or shorter booms are impractical. Operating weights range from 24,948 kg to 92,000 kg, reflecting the structural mass required for stability at extreme vertical reach.

283

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Working height	56.9–216 ft (17.3–65.8 m)	Maximum elevation at which platform occupants can work safely; defines the class boundary.
Platform capacity	507–1,001 lb (230–454 kg)	Total load limit for personnel, tools, and materials in the basket.
Operating weight	55,001–202,825 lb (24,948–92,000 kg)	Machine weight governs ground-bearing pressure, transport, and site access.
Engine power	55–115 hp	Diesel engine output required to extend telescoping sections and propel the chassis.

Cómo elegir

This class is appropriate when working heights exceed 160 ft and the task demands a self-propelled platform rather than fixed rigging or crane-suspended baskets. For projects in the 130–160 ft range, the 130-160 ft Telescopic Boom Lift band offers similar reach with lower weight, smaller footprints, and simpler transport. The 160+ ft class becomes necessary for skyscraper envelope work above the fifteenth floor, maintenance on communication towers or stadium light standards exceeding 180 ft, and industrial chimneys or silos where conventional access is infeasible. Site ground-bearing capacity must support machines weighing up to 92 metric tons, and delivery logistics require heavy-haul trailers and route planning.

Lo que maneja este tamaño

High-rise facade inspection and window replacement above 150 ft on commercial towers
Stadium and arena lighting maintenance on fixtures mounted 180–200 ft above grade
Communication tower antenna installation and servicing at heights beyond crane-basket reach
Industrial stack and silo maintenance where scaffolding erection time is prohibitive
Bridge superstructure inspection on cable-stayed and arch spans with tall piers
Exterior cladding and curtain-wall installation on skyscrapers during construction

Seguridad y operación

Wind-speed monitoring is critical; manufacturers specify maximum allowable wind for operation, often 28–35 mph, and may require real-time anemometers.
Ground preparation and outrigger setup demand engineering review on soft or sloped terrain to prevent tip-over at full extension.
Fall-protection and occupant-restraint systems are mandatory; platform occupants must use full-body harnesses anchored to designated points per ANSI/SAIA A92 standards.
Proximity to overhead power lines requires detailed clearance plans; at these heights, transmission lines and high-voltage distribution are common hazards.

Transporte y logística

Heavy-haul lowboy or RGN trailers required; machines in the upper weight range demand multi-axle configurations and overweight permits.
Transport widths and axle loads often trigger state DOT escort and route survey requirements; lead time for permitting can extend several weeks.
On-site assembly or boom-extension procedures may be necessary for models that exceed over-the-road dimension limits when fully stowed.

Alimentación

Diesel engines in the 55–115 hp range; fuel consumption rises significantly during boom extension cycles and sustained reach operations.
On-board fuel tanks typically provide 8–12 hours of intermittent operation; remote job sites require fuel-staging plans.
No electric or hybrid models are common in this class due to the power demand of hydraulic systems at extreme reach.

Preguntas frecuentes

What ground-bearing pressure do 160+ ft telescopic booms exert?

Operating weights from 24,948 kg to 92,000 kg translate to ground pressures that vary by outrigger configuration, often 150–400 psi under full load; site-specific soil analysis and matting are standard practice.

How do transport logistics differ from smaller boom classes?

Machines in this class frequently require overweight and overdimension permits, escort vehicles, and pre-planned routes; some models must be partially disassembled or have boom sections transported separately.

What certifications do operators need for 160+ ft booms?

ANSI/SAIA A92.20 standards apply; operators must hold training specific to boom lifts, and many jurisdictions or project specifications mandate additional high-reach endorsements.

Comparar modelos populares

Buscar por especificación →

Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.

Modelo	Altura de trabajo	Capacidad de plataforma
JLG 1850SJ	185 ft (56.4 m)	1,001 lb (454 kg)
Genie SX-180 Telescopic Boom Lift	186 ft (56.8 m)	750 lb (340 kg)
Snorkel 2100SJ	216 ft (65.8 m)	-
XCMG XGS58K	192 ft (58.6 m)	507 lb (230 kg)
XCMG XGS50K	164 ft (50.0 m)	661 lb (300 kg)
XCMG XGS158J-ANSI	164 ft (50.0 m)	661 lb (300 kg)