CAT CLASS: HQ-10004

50-100 cfm Electric Air Compressor

The 50-100 cfm electric air compressor class delivers sustained airflow for heavy pneumatic tools, including 60 lb breakers and continuous grinding or cutting operations. This is the largest band in the electric compressor ladder, positioned above the 20-50 cfm band. Units in this range supply 51–75 cfm free air and require industrial electrical infrastructure.

185

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Free air delivery	51–75 cfm	Continuous airflow capacity measured at standard atmospheric conditions
Engine power	15–96 hp	Electric motor horsepower driving the compression stage
Power supply	208-480V three-phase	Industrial electrical service required for motors in this size class
Operating pressure	100–175 psi	Maximum working pressure delivered to the air tool circuit

Comment choisir

This size class is appropriate when operating heavy pneumatic tools continuously or when multiple moderate tools run simultaneously from a single compressor. A 60 lb breaker or sustained grinding and cutting work demands the 51–75 cfm output this band provides. For lighter pneumatic work—chipping hammers, smaller grinders, or intermittent tool use—the 20-50 cfm Electric Air Compressor band offers adequate capacity with simpler electrical requirements. No larger electric compressor size class is catalogued; applications requiring more than 75 cfm typically move to diesel or gas-driven portable units.

Ce que cette taille peut gérer

Driving a 60 lb pneumatic breaker for continuous concrete demolition
Powering large pneumatic grinders for extended surface prep on industrial floors
Operating multiple cutting and grinding tools simultaneously in fabrication shops
Supplying air to rotary scabblers for concrete surface removal over large areas
Supporting pneumatic jackhammers in roadwork or heavy foundation demolition
Running continuous air-fed sandblasting or abrasive blasting operations

Sécurité et opération

Lockout/tagout procedures required when servicing compressor or connected air systems
Hearing protection necessary; industrial compressors in this class produce sustained high-decibel noise
Pressure relief valves and safety cutoffs must be tested regularly per manufacturer schedules
Ensure three-phase power hookup matches motor voltage and phase configuration to prevent equipment damage

Transport et logistique

Heavy-duty wheeled chassis or skid-mounted configuration; often positioned semi-permanently on job sites
Riggers or forklifts required for loading and unloading; typical weights exceed manual handling limits
Trailer transport for inter-site moves, usually requiring commercial vehicle towing capacity

Alimentation

208V, 240V, or 480V three-phase electrical service; single-phase not available in this size class
Dedicated circuit breakers rated to motor full-load amperage, typically 60–200 amps depending on horsepower
Hard-wired connections or industrial-grade twist-lock receptacles common; extension cords not recommended

Questions fréquentes

What differentiates this size from smaller electric compressor bands?

The 50-100 cfm class provides continuous airflow for heavy tools like 60 lb breakers, while the 20-50 cfm band handles lighter intermittent work. Motors in this range require three-phase industrial power rather than single-phase branch circuits.

Can this compressor run multiple tools at once?

Yes, units delivering 51–75 cfm can support multiple moderate pneumatic tools simultaneously, provided the total sustained consumption remains within the compressor's free air delivery rating.

Why are no electric compressors larger than 100 cfm catalogued?

Applications requiring more than 75 cfm typically use diesel or gas engine-driven portable compressors, which eliminate the need for three-phase electrical infrastructure at remote or temporary sites.