22,000-33,000 lb Track Excavator
The 22,000-33,000 lb (10-15 ton) track excavator is the utility contractor's everyday workhorse, sized for municipal infrastructure, trenching water and sewer mains, and small foundation work. This class sits at the bottom of the mid-size excavator ladder, above compact models and below the 33,000-50,000 lb machines used for larger site work. With engine outputs from 57 to 122 hp and dig depths to 20 feet, this size balances production capacity with transportability on standard trailers.
Cat classes
Choisissez une classe de taille — la capacité et la portée varient selon la gamme.
Spécifications clés
| Spécification | Plage typique | Signification |
|---|---|---|
| Operating weight | 10,000–14,900 kg (22,000–32,800 lb) | Defines the machine class and determines trailer requirements and ground pressure. |
| Engine power | 57–122 hp | Drives hydraulic pump capacity for digging force and cycle speed in production trenching. |
| Max dig depth | 18–20 ft (5.5–6.1 m) | Limits trench depth for utility installations and basement excavations without benching. |
| Max reach at ground level | 26–30 ft (7.9–9.1 m) | Determines working radius from a fixed position and ditch width capability. |
| Fuel tank capacity | 250–320 L (66–85 gal) | Supports full-day operation in most utility and site development applications. |
Comment choisir
This size class is appropriate for municipal utility trenching, residential and light commercial foundations, and general site work where production speed matters more than in compact excavator applications. Machines in this band handle 12- to 24-inch trenching buckets efficiently and move material at contractor-grade production rates. For tighter urban jobsites, smaller footprint requirements, or work inside existing structures, compact excavators below this class offer better maneuverability. When projects demand deeper excavation beyond 20 feet, higher breakout force for rock or hard clay, or faster material movement on large sites, the 33,000-50,000 lb Track Excavator class provides the necessary capacity.
Ce que cette taille peut gérer
- Trenching 8- to 12-foot-deep water and sewer service lines in municipal streets
- Excavating small residential basements and foundation footings
- Installing storm drainage systems and catch basins in commercial parking lots
- Digging utility trenches for electrical duct banks and communication conduit
- Grading and finish work on subdivision streets and cul-de-sacs
- Loading trucks with excavated material on small to mid-size site development projects
Sécurité et opération
- Operator certification under OSHA 1926 Subpart P required for excavation and trenching operations
- Rollover protective structures (ROPS) and falling object protective structures (FOPS) standard on cab models
- Ground conditions and slope stability must be assessed before operation; machine weight concentrates significant load on tracks
- Boom and bucket swing radius requires exclusion zones around the machine to protect ground personnel from struck-by hazards
Transport et logistique
- Requires tandem-axle tag trailer or tri-axle lowboy rated for 15–18 tons gross weight
- Typical transport dimensions fit within standard 8.5-foot width and 13.5-foot height limits on most highways without oversize permits
- Loading and unloading performed via hydraulic ramps or tilt-deck trailers; machines track on and off under own power
Alimentation
- Diesel fuel consumption typically 3–6 gallons per hour under normal digging and loading cycles
- Equipped with Tier 4 Final emissions engines using diesel exhaust fluid (DEF) in post-2015 models
- On-board fuel capacity supports 8–12 hours of continuous operation between refueling
Questions fréquentes
What bucket sizes does this excavator class typically use?
How does operating weight affect jobsite ground pressure?
What differentiates this size from the next class up?
Comparer les modèles populaires
Chercher par spécification →Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.
| Modèle | Poids en service | Profondeur d’excavation max | Portée max | Puissance moteur |
|---|---|---|---|---|
| John Deere 130P | 29,033 lb (13,169 kg) | 6 ft (1.8 m) | 27.3 ft (8.3 m) | 98 hp |
| Case CX145CSR | 31,967 lb (14,500 kg) | 19.7 ft (6.0 m) | 28.7 ft (8.7 m) | 100 hp |
| Case CX140E | 30,203 lb (13,700 kg) | 19.8 ft (6.0 m) | - | 102 hp |
| Hitachi ZX130-7B | 32,849 lb (14,900 kg) | 17.9 ft (5.5 m) | 27.4 ft (8.4 m) | 100 hp |
| Hyundai Construction Equipment R140LC-9S | 31,085 lb (14,100 kg) | 19.3 ft (5.9 m) | 30.1 ft (9.2 m) | 110 hp |
| Hyundai Construction Equipment R140LC-9 | 32,187 lb (14,600 kg) | 19.3 ft (5.9 m) | 30.4 ft (9.3 m) | 114 hp |
Équipements connexes
Parcourir par fabricant
Sources
Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.
22,000-33,000 lb Track Excavator
23 modèles · Chaque spécification citée à la source
