CAT CLASS: HQ-10263

25-45 hp Compact Tractor

The 25-45 hp compact tractor is the workhorse size for landscape contractors and municipal maintenance crews, offering sufficient power and hydraulic capacity to operate front-end loaders, backhoe attachments, augers, and rotary cutters throughout the work day. This mid-range band sits between the Up to 25 hp Compact Tractor used for lighter grounds work and the 45+ hp Compact Tractor specified when heavier implement draft or larger bucket capacity is required. Machines in this class deliver 29.6–39.6 hp and lift 740–1065 kg, balancing maneuverability with attachment versatility.

132

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Engine power	29.6–39.6 hp	Sufficient PTO and hydraulic output for mid-duty implements including 5-foot rotary cutters and post-hole augers.
Load capacity	1,631–2,348 lb (740–1,065 kg)	Front-loader lift capacity for moving pallets of sod, landscape materials, and grading applications.
Operating weight	2,154–3,428 lb (977–1,555 kg)	Stable enough for backhoe work and slope mowing without requiring ballast in most conditions.

Comment choisir

The 25-45 hp band is appropriate when work involves daily attachment changes—front loader in the morning, backhoe or rotary cutter in the afternoon—and operating weights under 1,600 kg keep the machine light enough for turf-conscious sites. Step down to the Up to 25 hp Compact Tractor when the primary work is finish mowing, light box-blade grading, or tasks where a narrower wheelbase and lower ground pressure are priorities. Step up to the 45+ hp Compact Tractor when implements demand more PTO horsepower (larger rotary cutters, heavy-duty tillers), when loader work regularly involves materials over 1,065 kg, or when a three-point hitch rated for Category II implements is specified.

Ce que cette taille peut gérer

Loading and spreading 500–1,000 kg of topsoil or mulch with a front-end loader bucket
Digging utility trenches and setting posts with a rear-mounted backhoe attachment
Mowing roadside ditches and park perimeters with a 5- to 6-foot mid-mount or rear rotary cutter
Drilling fence-post holes in mixed soil using a three-point auger attachment
Fine grading and backfilling around hardscape installations on residential and light-commercial sites
Clearing snow from parking areas and sidewalks with a front blade or blower attachment

Sécurité et opération

Rollover protective structures (ROPS) are standard; operators must use seatbelts when the ROPS is in the raised position
Verify ground conditions and slope angles before operating with a backhoe or loader at full extension to prevent tip-over
Disengage PTO and lower all attachments to the ground before dismounting or performing adjustments
Confirm hydraulic quick-couplers are fully seated and locked before pressurizing attachment circuits

Transport et logistique

Typical operating weights of 977–1,555 kg allow transport on a single-axle or tandem-axle utility trailer rated for 1,800–2,300 kg
Most machines in this class fit within 1.5–1.8 m transport width, permitting highway transport without special permits
Loading onto trailers via fold-down ramps or low-angle drive-on decks; no crane or forklift required

Alimentation

Diesel fuel is standard across all models in this horsepower range, with tank capacities typically 20–40 liters supporting half- to full-day operation
PTO output (540 rpm) powers rotary cutters, tillers, augers, and other driven implements directly from the engine
Hydraulic systems supply 25–50 liters per minute to operate front loaders, backhoes, and auxiliary attachments without external power

Questions fréquentes

What differentiates a 25-45 hp compact tractor from a larger utility tractor?

Compact tractors in this band use a lighter frame, smaller three-point hitch (typically Category I), and prioritize maneuverability and turf-friendly tires, while utility tractors above 45 hp are built for heavier ground engagement and Category II implements.

Can a 25-45 hp compact tractor operate both a loader and a backhoe simultaneously?

Most machines in this class are factory-compatible with subframe-mounted backhoes that remain attached while the front loader is in use, though operating both at once requires attention to machine stability and ballast.

What attachment compatibility should be confirmed before specifying this size?

Verify three-point hitch category (usually Cat I), PTO shaft size and speed (typically 540 rpm), hydraulic flow rate and pressure, and front-loader mounting pattern, as these vary by brand even within the same horsepower range.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Poids en service	Profondeur d’excavation max	Portée max	Puissance moteur
Kubota LX3520	2,154 lb (977 kg)	-	-	30 hp
Kioti CK4020	2,679 lb (1,215 kg)	-	-	40 hp
Massey Ferguson MF 1M.35	3,428 lb (1,555 kg)	-	-	36 hp
Massey Ferguson MF 1M.40	3,428 lb (1,555 kg)	-	-	39 hp