Up to 26 ft Self-Propelled Mast Lift
Self-propelled mast lifts up to 26 ft working height are the most compact class of vertical personnel lifts, designed for indoor access work where platform heights remain below 20 ft. This size class fits through standard doorways and operates on finished floors without surface damage, making it the primary choice for drop ceiling installation, light fixture maintenance, and interior finishing tasks. It represents the smallest and most maneuverable rung on the self-propelled mast lift ladder.

Cat classes
Choisissez une classe de taille — la capacité et la portée varient selon la gamme.
Spécifications clés
| Spécification | Plage typique | Signification |
|---|---|---|
| Working height | 3.3–25 ft (1.0–7.6 m) | Maximum vertical reach, covering most standard commercial ceiling heights and allowing work on single-story interiors. |
| Platform capacity | 136–500 kg (300–1,100 lbs) | Supports operator and tools for routine maintenance and installation tasks without overloading the compact frame. |
| Stowed height | 1.6–2.0 m (5.2–6.6 ft) | Low profile permits passage through standard doorways and under most ceiling obstructions when traveling between work areas. |
| Travel speed (stowed) | 3.0–4.5 km/h | Slow, controlled movement suitable for navigating finished floors and tight indoor spaces without surface damage. |
| Operating weight | 180–1,740 kg (400–3,840 lbs) | Lightweight construction minimizes floor loading, critical for elevated slabs and sensitive flooring materials. |
Comment choisir
This size class is appropriate when platform heights remain below 20 ft and the machine must navigate standard doorways or operate on polished concrete, tile, or other finished floors without protection. The compact footprint and low weight make it suitable for retail spaces, lobbies, and occupied buildings where larger equipment cannot fit or would damage surfaces. When work regularly exceeds 20 ft platform height or requires outdoor use on uneven ground, the 26-36 ft Self-Propelled Mast Lift offers greater reach and stability. This smallest size class sacrifices vertical capacity for maximum indoor maneuverability.
Ce que cette taille peut gérer
- Installing or replacing drop ceiling tiles and grid systems in commercial offices
- Light fixture maintenance and bulb replacement in retail stores and lobbies
- Interior painting and drywall finishing in spaces with 10–15 ft ceilings
- HVAC vent installation and ductwork access in finished interiors
- Signage installation and window cleaning in ground-floor commercial spaces
- Electrical conduit work and junction box access in warehouses with finished floors
Sécurité et opération
- Non-marking tires and low ground pressure protect finished flooring; models specify maximum allowable floor grades (typically 20–30% gradeability)
- Wind speed ratings of 12.5–28 mph limit outdoor use; indoor-only operation eliminates most weather-related restrictions
- Compact platforms (0.4–0.7 m width) require operators to manage tool placement carefully to avoid exceeding capacity or creating tip hazards
- Low stowed height reduces visibility over the machine; operators must verify clearance when approaching doorways or passing under soffits
Transport et logistique
- Lightweight models (under 500 kg) load onto standard utility trailers without special equipment; heavier units require ramps or lift gates
- Stowed dimensions typically permit transport in box trucks or enclosed trailers alongside other compact equipment
- Most models do not require commercial towing capacity; mid-size trucks and vans handle trailer transport for lighter units
Alimentation
- Electric-only power systems dominate this size class, using onboard battery packs charged from standard 110V or 220V outlets
- Battery runtimes typically support full-day indoor operation; overnight charging between shifts is standard practice
- Zero emissions and quiet operation meet indoor air quality and noise requirements for occupied buildings
Questions fréquentes
What ceiling height requires moving to the next size class?
Can this size class operate outdoors?
How does operating weight affect floor loading decisions?
Comparer les modèles populaires
Chercher par spécification →Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.
| Modèle | Hauteur de travail | Capacité de plateforme |
|---|---|---|
| Dingli AMWP13-9200 | 12.4 ft (3.8 m) | 441 lb (200 kg) |
| Dingli AMWP7-8100L | 6.7 ft (2.0 m) | 441 lb (200 kg) |
| Haulotte Star 6 CRAWLER | 19 ft (5.8 m) | 441 lb (200 kg) |
| Haulotte Star 6 PICKING | 19 ft (5.8 m) | 463 lb (210 kg) |
| MEC MMAE16 | 22 ft (6.7 m) | 500 lb (227 kg) |
| Genie GR-12 | 18 ft (5.5 m) | 500 lb (227 kg) |
Équipements connexes
Parcourir par fabricant
Sources
Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.
Up to 26 ft Self-Propelled Mast Lift
44 modèles · Chaque spécification citée à la source