Ditch Witch
ST37X Stand-On Trencher
37 hp
Puissance moteur
4,109 lb (1,864 kg)
Poids en service
36.0 in (914 mm)
cutting depth
40 L
fuel tank capacity
7.6 km/h
ground drive speed
0.4 bar
ground pressure
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Poids en service | cutting depth |
|---|---|---|---|---|
| Vermeer CTX160 Mini Skid Steer | 96% | 40 hp | 4,114 lb (1,866 kg) | - |
| Vermeer ML150 Mini Loader | 90% | 40 hp | 3,999 lb (1,814 kg) | - |
| Vermeer ML130 Mini Loader | 88% | 40 hp | 3,699 lb (1,678 kg) | - |
| Vermeer CTX100 Mini Skid Steer | 87% | 40 hp | 3,400 lb (1,542 kg) | - |
| Vermeer ML100 Mini Loader | 77% | 25 hp | 3,466 lb (1,572 kg) | - |
| Vermeer S925TX Mini Skid Steer | 76% | 25 hp | 3,466 lb (1,572 kg) | - |
Documents
Spécifications complètes
| Battery - Electrical system | 12 V | ↗ |
| Battery - SAE cold crank @ 0ºF (-18ºC) | 800 amps | ↗ |
| Battery - SAE reserve capacity rating | 110 min | ↗ |
| Dimensions (Std) - Angle of approach (A3) | 30 ° | ↗ |
| Dimensions (Std) - Angle of departure (A2) | 27 ° | ↗ |
| Dimensions (Std) - Boom travel down (C) | 60 ° | ↗ |
| Dimensions (Std) - Boom travel up (C1) | 60 ° | ↗ |
| Dimensions (Std) - Centerline trench to edge (E1) | 4–20 in (10.2–50.8 cm) | ↗ |
| Dimensions (Std) - Centerline trench to edge (E2) | 21–37 in (53.3–94.0 cm) | ↗ |
| Dimensions (Std) - Digging chain | 50 K | ↗ |
| Dimensions (Std) - Ground clearance, min, center/side | 7.4/3.7 in | ↗ |
| Dimensions (Std) - Headshaft height (F) | 23 in (58.4 cm) | ↗ |
| Dimensions (Std) - Headshaft overhang (L) | 18 in (45.7 cm) | ↗ |
| Dimensions (Std) - Machine width, excluding tracks | 35 in (88.9 cm) | ↗ |
| Dimensions (Std) - Overall height of machine | 57 in (145 cm) | ↗ |
| Dimensions (Std) - Overall length of machine, 36-in chain (L2) | 130 in (330 cm) | ↗ |
| Dimensions (Std) - Overall length of machine, w/out chain | 104 in (265 cm) | ↗ |
| Dimensions (Std) - Overall width of machine | 42 in (107 cm) | ↗ |
| Dimensions (Std) - Swing radius, front, 36-in chain | 81 in (206 cm) | ↗ |
| Dimensions (Std) - Swing radius, rear | 44 in (112 cm) | ↗ |
| Dimensions (Std) - Trench depth, max (A) | 36 in (91.4 cm) | ↗ |
| Dimensions (Std) - Trench width, max (B) | 16 in (40.6 cm) | ↗ |
| Dimensions (Std) - Wheelbase/track length | 43 in (109 cm) | ↗ |
| Fluid Capacities - Engine oil, w/filter | 5 qt | ↗ |
| Fluid Capacities - Fuel tank capacity | 10.5 gal | ↗ |
| Fluid Capacities - Hydraulic reservoir capacity | 9.2 gal | ↗ |
| Hydraulic System - Chain speed | 369 f/min | ↗ |
| Hydraulic System - Combined flow rate | 13.9 gpm | ↗ |
| Hydraulic System - Flow rate | 15 gpm | ↗ |
| Hydraulic System - Pressure | 3,625 psi | ↗ |
| Noise Level - Sound power | 103 dBA | ↗ |
| Noise Level - Sound pressure at operator ear | 89 dBA | ↗ |
| Performance - 9-in (230-mm) tracks | 5.5 psi | ↗ |
| Performance - Backward/forward/right/left | 25 ° w/out tilting or sliding | ↗ |
| Performance - Forward/reverse | 4.7 mph | ↗ |
| Power - *Tilt angle, max, fore and aft | 30 ° | ↗ |
| Power - *Tilt angle, max, side to side | 30 ° | ↗ |
| Power - Bore | 3.5 in (87.9 mm) | ↗ |
| Power - Displacement | 100.1 in3 | ↗ |
| Power - Emissions compliance | EPA Stage V | ↗ |
| Power - Engine | Yanmar® 3TNV88C | ↗ |
| Power - Fuel | Diesel | ↗ |
| Power - Number of cylinders | 3 | ↗ |
| Power - Stroke | 3.5 in (89.9 mm) | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →