Vermeer
SC402 Stump Cutter
40 hp
Puissance moteur
10.0 gal
Capacité de carburant
1,949 lb (884 kg)
Poids en service
15 in (38.1 cm)
cutting depth
24.0 in (61 cm)
cutting height
4 wheel drive
drive type
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Puissance moteur | Capacité de carburant | Poids en service |
|---|---|---|---|---|
| Toro STX-38 Stump Grinder | 92% | 38 hp | - | 1,750 lb (794 kg) |
| Bandit Model 2550 (Rubber Tire) | 87% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit SG-40 | 86% | 38 hp | - | 1,499 lb (680 kg) |
| Bandit Model 2550 (Track) | 84% | 49 hp | - | 2,280 lb (1,034 kg) |
| Toro STX-26 Stump Grinder | 63% | 26 hp | - | 1,199 lb (544 kg) |
| Bandit SG-75W | 50% | 74 hp | - | 4,321 lb (1,960 kg) |
Documents
Spécifications complètes
| Air Cleaner | Dry-type safety element and restriction indicator | ↗ |
| Alternator | 20/50 Amp (rpm-based) | ↗ |
| Axle/Suspension | Rigid/fixed (rear) | ↗ |
| Battery | 550 CCA | ↗ |
| Bearing Dimensions | 1.3 bore | ↗ |
| Bearing Dimensions - Secondary Belt | 1.8 | ↗ |
| Belt Type | V-belt | ↗ |
| Blade Travel Above Ground | 8 in (20.3 cm) | ↗ |
| Blade Travel Below Ground | 2.5 in (63.5 mm) | ↗ |
| Brake Type | Spring-applied, hydraulic release at rear motors | ↗ |
| Chip Blade Dimension | 33-in wide x 12-in tall (83.8 cm x 30.5 cm) | ↗ |
| Chip Containment | 7.5 cu ft | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Fixed side | ↗ |
| Controller | Danfoss® | ↗ |
| Cooling Medium | Air | ↗ |
| Cutterwheel Cut Above Ground | 24 in (61.0 cm) | ↗ |
| Cutterwheel Cut Below Ground | 15 in (38.1 cm) | ↗ |
| Cutterwheel Diameter without Teeth | 17 in (43.2 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Shaft | 1.8 | ↗ |
| Cutterwheel Speed | 1525 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 47 in (119 cm) | ↗ |
| Cutterwheel Thickness | .5 in | ↗ |
| Degree of Oscillation | 12 deg | ↗ |
| Directional Control | Electric over hydraulic | ↗ |
| Fender Description | Yes | ↗ |
| Filtration Method | 10-micron fill strainer and 6-micron return filter | ↗ |
| Flow Control | SmarSweep | ↗ |
| Frame Description | Welded tube and plate steel | ↗ |
| Fuel Tank Capacity | 10 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Gross Horsepower (Maximum) | 40 hp | ↗ |
| Height | 53 in (135 cm) | ↗ |
| High Speed Travel | 130 ft/min | ↗ |
| Jackshaft Bearing Type | Sealed ball | ↗ |
| Jackshaft Dimension | 1.3 | ↗ |
| Length | 118 in (300 cm) | ↗ |
| Low Speed Travel | 65 ft/min | ↗ |
| Make and Model | Briggs & Stratton Vanguard® EFI/ETC | ↗ |
| Max Fuel Consumption | 2.2 gph | ↗ |
| Maximum Angle of Continuous Operation | 25 deg | ↗ |
| Number of Cylinders | 2 | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 20 | ↗ |
| Number of Primary Belts | 2 individual (matched pair) | ↗ |
| Number of Secondary Belts | 6 banded | ↗ |
| Number of Teeth | 20 | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 2.5 qt | ↗ |
| Overall Height Transport | 53 in (135 cm) | ↗ |
| Overall Width Transport (with duals) | 50.1 in (127 cm) | ↗ |
| Overall Width Transport (without duals) | 35.5 in (90.2 cm) | ↗ |
| Pump Flow at Maximum RPM | 6.2 gpm | ↗ |
| Recommended Oil | 10W30 (see engine manual) | ↗ |
| Recommended Oil Type | Vermeer HyPower 68 | ↗ |
| Reversible Pockets/Teeth | 20 | ↗ |
| Shutdown System | Engine low oil pressure will derate engine | ↗ |
| Sound Power | 107.6 dB(A) | ↗ |
| Steerable Axle Type | Hydraulic steering oscillating axle | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →