Up to 40 in Double Drum Roller
Up to 40 in Double Drum Roller machines are compact tandem vibratory rollers designed for driveways, pedestrian paths, and asphalt patch work where access is restricted. This is the smallest rung on the ride-on double drum ladder, built to fit through residential gates and load onto light trailers. Machines in this class typically weigh 1,600–1,700 lb operating weight and offer drum widths from 32 to 40 inches.
Cat classes
Pick a size class — capacity and reach differ across the range.
Key specifications
| Specification | Typical range | What it means |
|---|---|---|
| Drum Width | 32–40 in (81.3–102 cm) | Compaction path width; narrow enough to fit through standard gates and tight residential access points. |
| Operating Weight | 1,610–1,715 lb (730–778 kg) | Static force available for compaction; light enough for trailer transport and use over residential utilities. |
| Centrifugal Force | 17.0–36.9 kN | Dynamic compaction energy in vibration mode; sufficient for asphalt patch repair and granular base. |
| Engine Power | 15–25 hp | Diesel power for propulsion and vibration; typical for compact tandem rollers in this weight class. |
| Water Tank Capacity | 110–190 L | Drum wetting capacity to prevent asphalt pickup; smaller tanks reflect shorter run times between fills. |
How to choose
Up to 40 in Double Drum Roller machines suit driveways, residential paths, parking lot repairs, and other work where access is through gates or narrow openings. This size is appropriate when the job requires a ride-on tandem for productivity but the site cannot accommodate larger equipment. For broader commercial parking lots, streetwork, or projects without width constraints, the 40–52 in Double Drum Roller class offers greater coverage and productivity. Machines in this smallest band prioritize portability and access over production speed.
What this size handles
- Residential driveway asphalt compaction after new paving or overlay
- Patch repair on parking lots and service roads where full-size rollers cannot access
- Pedestrian path and trail surfacing with compacted aggregate or thin asphalt lifts
- Gate-restricted backyard or side-yard utility trench restoration
- Small commercial site work with limited staging area for equipment
- Compaction around building perimeters and landscaped areas with narrow access
Safety & operation
- Operator platforms are compact; maintaining stable footing and awareness of surroundings is critical in confined residential or commercial spaces
- Vibration exposure during extended operation; machine design and maintenance of isolation mounts affect operator comfort
- Slope operation limits apply; manufacturer specifications typically restrict cross-slope and grade angles to prevent tipping on narrow machines
- Overhead clearance and proximity to structures, fences, and utilities require attention when maneuvering in tight residential or urban sites
Transport & logistics
- Light utility trailers or small equipment trailers with 3,500–5,000 lb capacity; total weight under 2,000 lb suits towing by mid-size trucks and some heavy-duty SUVs
- Low deck height and narrow drum width allow loading via walk-up ramps without powered tilt-deck trailers
- Compact footprint permits transport alongside other small compaction tools on a single trailer bed
Power & supply
- Diesel fuel; typical tank capacity of 23–25 gallons supports several hours of operation between refueling on small patch jobs
- Water supply for drum wetting; 110–190 L tanks require periodic refill from truck-mounted tanks or site hydrants during asphalt work
Frequently asked
What is the effective compaction width in a single pass?
Can this size compact full-depth asphalt lifts on commercial projects?
What trailer and towing capacity is required?
Compare popular models
Find by spec →Normalised to the same units. A dash means the figure was not published.
| Model | Operating weight | Engine power |
|---|---|---|
| Bomag BW 100 AC-5 | 5,291 lb (2,400 kg) | 33 hp |
| Bomag BW 100 AD e-5 | 5,512 lb (2,500 kg) | - |
| Bomag BW 100 ADM-5 | 3,748 lb (1,700 kg) | 20 hp |
| Bomag BW 100 SCC-5 | 3,748 lb (1,700 kg) | 20 hp |
| Bomag BW 100 SL-5 | 5,181 lb (2,350 kg) | 25 hp |
| Bomag BW 100 SLM-5 | 3,197 lb (1,450 kg) | 20 hp |
Related equipment
Browse by manufacturer
Sources
Every specification is verified against the manufacturer's published data, with the source linked for reference.
Up to 40 in Double Drum Roller
26 models · Every spec cited to source