1+ gpm Airless Paint Sprayer
The 1+ gpm Airless Paint Sprayer class represents the highest-output tier of airless spray equipment, engineered for industrial coatings, elastomerics, and block filler applications that demand sustained material delivery through long hose runs. These machines occupy the top rung of the airless sprayer ladder, above the 0.5-1 gpm class. Fifteen models from Titan and Graco define this performance category.
Cat classes
Pick a size class — capacity and reach differ across the range.
Key specifications
| Specification | Typical range | What it means |
|---|---|---|
| Maximum Delivery | 1.0–4.0 gpm | High-volume output sustains industrial coating application rates through extended hose lengths. |
| Pressure Range | Up to 7000 PSI | Peak hydraulic force atomizes high-build materials and overcomes friction loss in long hose runs. |
| Hose Capacity | 300+ ft | Engineered to maintain spray pattern quality across job sites requiring significant standoff distance. |
| Tip Size Range | .031–.095 in | Accommodates heavy-bodied coatings including block fillers and high-build elastomerics. |
How to choose
The 1+ gpm Airless Paint Sprayer band is appropriate for industrial coating projects requiring sustained high-volume delivery—commercial block filling, large-scale elastomeric application, and industrial protective coatings pushed through hose runs exceeding 150 feet. When projects involve standard architectural paints, moderate material viscosity, or hose runs under 100 feet, the 0.5-1 gpm Airless Paint Sprayer class provides sufficient output without the hydraulic overhead of industrial-grade pumps. This top-tier class is specified when material rheology, application rate, or site geometry demand flow rates that smaller sprayers cannot sustain without pressure loss or pattern degradation.
What this size handles
- Elastomeric coating application on multi-story commercial facades with ground-level sprayer placement
- Block filler and high-build primers on tilt-up concrete and masonry structures
- Industrial protective coatings in manufacturing facilities requiring long hose deployment
- Parking structure deck coatings and traffic-bearing waterproofing systems
- Large-scale fireproofing and intumescent coating application
- Heavy-bodied roof coatings on commercial and industrial buildings
Safety & operation
- High-pressure injection injury risk requires immediate medical attention if spray tip penetrates skin, even without visible wound
- Tip guard and trigger lock mechanisms must remain functional; pressure relief before servicing or tip changes is mandatory
- Adequate ventilation and respiratory protection required when spraying solvent-based or isocyanate-containing coatings
- Ground and bond equipment when spraying flammable materials to prevent static discharge ignition
Transport & logistics
- Truck-bed or flatbed transport for cart-mounted units; some models require lift-gate or forklift placement
- Trailer-mounted configurations may require 2-in ball hitch and appropriate tongue weight capacity
Power & supply
- Electric models typically require 230V single-phase or 230/460V three-phase circuits with 30–60 amp service
- Gas-powered variants use 5–13 HP engines with integral fuel tanks for remote site operation
Frequently asked
What distinguishes this class from the 0.5-1 gpm band?
Which power configuration suits job sites without grid access?
How does hose length affect performance in this class?
Related equipment
Browse by manufacturer
Sources
Every specification is verified against the manufacturer's published data, with the source linked for reference.
1+ gpm Airless Paint Sprayer
15 models · Every spec cited to source