600-1,200 cfm Air Scrubber / Negative Air Machine Reference

Key specifications

Specification	Typical range	What it means
Airflow	600–1,177 cfm	Volume of filtered air moved per minute, determines containment size and air change rate
Duct diameter	6–12 in (15.2–30.5 cm)	Common inlet and outlet collar sizes for flexible ducting connections
Filtration stages	3–4 stages	Typically includes pre-filter, optional bag filter, HEPA, and sometimes carbon for odour control

How to choose

This 600–1,200 cfm range is appropriate when establishing full negative air containment on single-room abatement jobs, mould remediation in residential spaces, or asbestos removal in small commercial areas. The airflow supports 1000 cfm through standard 6–12 inch ducting, adequate for maintaining negative pressure in contained spaces up to moderate size. For smaller jobs—single bathrooms, crawl spaces, or spot remediation—the Up to 600 cfm Air Scrubber / Negative Air Machine offers sufficient capacity with easier portability. When containment extends across multiple large rooms, multi-storey industrial abatement, or projects requiring faster air change rates, the 1,200+ cfm Air Scrubber / Negative Air Machine provides the additional capacity needed to maintain proper negative pressure differentials.

What this size handles

Single-family home mould remediation with one or two rooms under containment
Asbestos tile removal in office suites or retail spaces with contained work area
Lead paint abatement in residential renovation projects requiring negative air
Water damage restoration with HEPA filtration in apartments or condominiums
Small-scale demolition with dust containment in occupied buildings
Post-fire cleanup requiring carbon filtration for smoke odour in single zones

Safety & operation

HEPA filters must meet IEST or equivalent standards for the hazard class being contained (asbestos, mould, lead)
Continuous monitoring of static pressure differential required to verify negative air is maintained
Filter change-out procedures must follow containment protocols to avoid cross-contamination
Pre-filters require regular inspection and replacement to prevent HEPA filter loading and airflow loss

Transport & logistics

Portable by hand or dolly; most units feature built-in handles and wheel sets for one- or two-person movement
Fit in cargo vans, pickup beds, or small trailers; footprint typically under 3 ft × 2 ft
No special rigging required; units weigh 100–200 lb and load with standard material handling

Power & supply

Standard 115V single-phase or 230V circuits, typically drawing 5–15 amps depending on motor speed
Dedicated circuit recommended to prevent nuisance tripping during continuous operation
Cord length and gauge must support distance from distribution panel to containment entry

Frequently asked

How many air changes per hour does this size deliver?

At 1000 cfm, a unit provides approximately 60 air changes per hour in a 1,000 cubic foot space (e.g., 10 ft × 10 ft × 10 ft room). Air change requirements vary by regulation and hazard type.

What negative pressure differential is typical for this class?

Most units in this range maintain 0.02–0.10 inches water column differential, sufficient for OSHA and EPA containment standards when properly ducted and sealed.

Can this size run continuously for multi-day projects?

Yes, machines in this class are designed for continuous duty cycles spanning days or weeks, provided filters are monitored and changed as they load.

600-1,200 cfm Air Scrubber / Negative Air Machine

Cat classes