Skip to content
Catalog
← Electric Scissor Lift
CAT CLASS: HQ-10635

27-34 ft Electric Scissor Lift

The 27-34 ft electric scissor lift class delivers platform heights from 27 to 34 feet, typically referenced as the 32 ft class in the rental industry. This size bridges mid-height indoor work and high-bay warehouse applications, providing the reach needed for warehouse racking, sprinkler main installation, and structural steel work inside buildings where outdoor rough-terrain models cannot operate.

511
Models
18
Brands
Electric Scissor Lift

Cat classes

Pick a size class — capacity and reach differ across the range.

Key specifications

SpecificationTypical rangeWhat it means
Platform height27–32 ft (8.2–9.8 m)Working height reaches 33–38 ft, accounting for operator reach above the platform.
Platform capacity500–700 lbs (227–318 kg)Accommodates two operators plus tools and materials for elevated installation work.
Width32–46 in (81.3–117 cm)Fits through standard double-door openings and navigates warehouse aisles while stowed.
Gradeability25–30%Handles moderate floor slopes common in industrial facilities and loading areas.
Drive speed (elevated)0.5–0.7 mphAllows repositioning at height within the same work zone without lowering the platform.

How to choose

The 27-34 ft class is specified when platform height requirements exceed 26 feet but remain below 34 feet—typical for high-bay warehouse maintenance, upper-level racking, and roof structure access from inside the building. When work stays consistently below 26 feet, the 20-27 ft Electric Scissor Lift offers easier maneuverability in tighter spaces and lower transport height. For platform heights above 34 feet or outdoor structural work, the 34+ ft Electric Scissor Lift or rough-terrain models provide the necessary reach and stability.

What this size handles

  • Installing or servicing warehouse racking systems at 28–32 ft storage levels
  • Running sprinkler mains and fire suppression piping in high-bay facilities
  • Mounting lighting fixtures and electrical conduit in distribution centers
  • Accessing roof steel and purlin connections from inside the building envelope
  • HVAC duct installation in tall retail or industrial interiors
  • Signage and wayfinding installation in convention centers and airports

Safety & operation

  • Pothole protection and tilt sensors prevent operation on uneven surfaces or excessive slopes
  • Guardrails and mid-rails surrounding the platform meet ANSI A92 and CSA B354 fall-protection standards
  • Descent alarm and platform overload indicators alert operators to unsafe conditions
  • Outriggers or automatic leveling systems stabilize the base on sloped warehouse floors

Transport & logistics

  • Typical operating weight of 6,000–8,500 lbs requires tandem-axle equipment trailer rated for 10,000+ lbs
  • Stowed height of 8–9 ft allows transport under most bridge and overhead clearances without permits
  • Width under 4 ft permits loading two units side-by-side on wider trailers

Power & supply

  • Equipped with 24V, 36V, or 48V DC battery packs charged via standard 110V or 220V outlets overnight
  • Battery runtime typically supports 6–8 hours of intermittent use per charge cycle
  • Zero emissions make this class suitable for enclosed warehouse and climate-controlled environments

Frequently asked

What distinguishes the 27-34 ft class from smaller electric scissor lifts?
This class provides the additional height needed to reach warehouse racking above 26 feet and structural elements near 30-foot ceilings, where 20-27 ft models fall short. The larger platform capacity and more robust drive system also support heavier material loads common in high-bay installations.
Can this size class operate on polished concrete warehouse floors?
Yes, non-marking solid rubber or foam-filled tires protect finished floors, and electric drive systems eliminate hydraulic leak risks. Many models include proportional drive controls that reduce sudden movements on smooth surfaces.
What ceiling height is required to fully elevate a 27-34 ft scissor lift?
A minimum clear height of 34–36 feet is necessary to reach maximum platform elevation, accounting for the scissor mechanism's vertical travel and overhead clearance for operators and materials.

Compare popular models

Find by spec →

Normalised to the same units. A dash means the figure was not published.

ModelWorking heightPlatform capacity
Haulotte Compact 10N DUAL 33.1 ft (10.1 m)551 lb (250 kg)
JLG ES3246 32 ft (9.8 m)705 lb (320 kg)
Haulotte Compact 12 DX 39.9 ft (12.2 m)992 lb (450 kg)
MEC 3232SE 38.1 ft (11.6 m)549 lb (249 kg)
Snorkel S4732E 38 ft (11.6 m)769 lb (349 kg)
Genie GS-3246 E-Drive Scissor Lift 38.5 ft (11.7 m)701 lb (318 kg)

Related equipment

Browse by manufacturer

Sources

Every specification is verified against the manufacturer's published data, with the source linked for reference.

27-34 ft Electric Scissor Lift

53 models · Page 2 of 2 · Every spec cited to source