Vermeer
RR205s Rotary Rake
40 hp
Engine power
3,263 lb (1,480 kg)
Operating weight
Documents
Full specifications
| Drive | PTO | ↗ |
| Flotation | 2x walking tandem axle under each rotor | ↗ |
| Highway Lights | Standard | ↗ |
| Hitch | Drawbar | ↗ |
| Hydraulic Pressure | 2000 psi | ↗ |
| Hydraulic Type | "- One single acting control valve with float function to operate the rotor raise/lower function. - One double acting control valve without float to operate the rear rotor offset." | ↗ |
| Hydraulic flow rate | 6 gpm | ↗ |
| Lighting System | ASABE S279 7-pin connection for highway lights | ↗ |
| Minimum Tractor Weight | 2,175 lbs (987 kg) | ↗ |
| Number of double tines per arm | 4 | ↗ |
| Number of tine arms | 2 x10 (20) | ↗ |
| PTO horsepower minimum | 40 hp | ↗ |
| PTO speed | 540 rpm | ↗ |
| Raking width maximum | 20.3 ft (6.2 m) | ↗ |
| Raking width minimum | 11.1 ft (3.4 m) | ↗ |
| Recommended PTO speed | 400 rpm - 500 rpm | ↗ |
| Rotor diameter | 11 ft (3.4 m) | ↗ |
| Rotor lift | Hydraulic | ↗ |
| Rotor tire size | 18x8.50-8 x (4) | ↗ |
| Safety Chain | Optional | ↗ |
| Tongue/hitch weight | 1,699 lbs (771 kg) | ↗ |
| Tooth diameter | .3 in | ↗ |
| Total Weight | 3,262 lbs (1,480 kg) | ↗ |
| Tractor safety requirements | "A Rollover Protective Structure (ROPS) and seat belt Upright exhaust system" | ↗ |
| Transport Height | 4.9 ft (1.5 m) | ↗ |
| Transport Length | 25 ft (7.6 m) | ↗ |
| Transport Width | 8.3 ft (2.5 m) | ↗ |
| Transport tire size | 18x8.50-8 x (4) | ↗ |
| Windrow position | Left side | ↗ |
| Windrow width adjustment | Manual | ↗ |
| Windrow width maximum | 47 in (119 cm) | ↗ |
| Windrow width minimum | 24 in (61.0 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →