Vermeer
SC362 Stump Cutter
35 hp
Engine power
6.0 gal
Fuel capacity
1,321 lb (599 kg)
Operating weight
24.0 in (61 cm)
cutter wheel cut above ground
17.0 in (43.2 cm)
cutter wheel diameter
15 in (38.1 cm)
cutting depth
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit SG-40 | 90% | 38 hp | - | 1,499 lb (680 kg) |
| Toro STX-38 Stump Grinder | 84% | 38 hp | - | 1,750 lb (794 kg) |
| Toro STX-26 Stump Grinder | 83% | 26 hp | - | 1,199 lb (544 kg) |
| Bandit Model 2550 (Track) | 76% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2550 (Rubber Tire) | 75% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit SG-75W | 39% | 74 hp | - | 4,321 lb (1,960 kg) |
Documents
Full specifications
| Air Cleaner | Dry-type safety element and restriction indicator | ↗ |
| Alternator | 20 amp | ↗ |
| Axle/Suspension | Rigid/Fixed (Rear) | ↗ |
| Battery | 400 CCA | ↗ |
| Bearing Dimensions | 1.3 bore | ↗ |
| Bearing Dimensions - Secondary Belt | 1.8" (4.8 cm) double spherical roller pillow block | ↗ |
| Belt Type | V-Belt | ↗ |
| Chip Containment | 7.7 cu ft | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Fixed side location | ↗ |
| Controller | Vermeer ACS | ↗ |
| Cooling Medium | Air | ↗ |
| Cutterwheel Cut Above Ground | 24 in (61.0 cm) | ↗ |
| Cutterwheel Cut Below Ground | 15 in (38.1 cm) | ↗ |
| Cutterwheel Diameter | 17 in (43.2 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Shaft | 1.8" (4.8 cm) | ↗ |
| Cutterwheel Speed | 1400 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 47 in (119 cm) | ↗ |
| Cutterwheel Thickness | .5 in | ↗ |
| Directional Control | Manual hydraulic value | ↗ |
| Fender Description | Yes | ↗ |
| Filtration Method | Pump suction strainer (100 mesh) and 6 micron return filter | ↗ |
| Flow Control | AutoSweep® (option) or 2 speed ground drive | ↗ |
| Frame Description | Welded tube and plate steel | ↗ |
| Fuel Tank Capacity | 6 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Gross Horsepower (Maximum) | 35 hp | ↗ |
| Height | 53 in (135 cm) | ↗ |
| High Speed Travel | 133 ft/min | ↗ |
| Jackshaft Bearing Type | Sealed ball | ↗ |
| Jackshaft Dimension | 1.3 | ↗ |
| Length | 110 in (279 cm) | ↗ |
| Low Speed Travel | 66 ft/min | ↗ |
| Make and Model | Briggs & Stratton Vanguard | ↗ |
| Max Fuel Consumption | 3.2 gph | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 16 | ↗ |
| Number of Primary Belts | 2 individual (matched pair) | ↗ |
| Number of Secondary Belts | 6 Banded | ↗ |
| Number of Teeth | 16 | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 2 qt | ↗ |
| Overall Height Transport | 53 in (135 cm) | ↗ |
| Overall Width Transport (with duals) | 49.8 in (126 cm) | ↗ |
| Overall Width Transport (without duals) | 35 in (88.9 cm) | ↗ |
| Pump Flow at Maximum RPM | 3.7 gpm | ↗ |
| Recommended Oil | 10W30 (See engine manual) | ↗ |
| Recommended Oil Type | Vermeer HyPower 68 | ↗ |
| Reversible Pockets/Teeth | 16 | ↗ |
| Shutdown System | Engine low oil pressure | ↗ |
| Sound Power | 106 | ↗ |
| Standard Gauges | Hourmeter | ↗ |
| Steerable Axle Type | Hydraulic steering, oscillating axle | ↗ |
| Switches | Two-speed ground drive, clutch engage/disengage, operator presence handles | ↗ |
| System Type | Open-loop series system | ↗ |
| System Voltage | 12 V | ↗ |
| System relief pressure | 2030 psi | ↗ |
| Tank capacity | 4 gal | ↗ |
| Tires - Option One | 5.7" x 8" (14.5 x 20.3 cm) duals standard | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →