Vermeer
SC402 Stump Cutter
40 hp
Engine power
10.0 gal
Fuel capacity
1,949 lb (884 kg)
Operating weight
15 in (38.1 cm)
cutting depth
24.0 in (61 cm)
cutting height
4 wheel drive
drive type
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Toro STX-38 Stump Grinder | 92% | 38 hp | - | 1,750 lb (794 kg) |
| Bandit Model 2550 (Rubber Tire) | 88% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit SG-40 | 87% | 40 hp | - | 1,499 lb (680 kg) |
| Bandit Model 2550 (Track) | 82% | 49 hp | - | 2,560 lb (1,161 kg) |
| Toro STX-26 Stump Grinder | 63% | 26 hp | - | 1,199 lb (544 kg) |
| Bandit SG-75W | 50% | 74 hp | - | 4,321 lb (1,960 kg) |
Documents
Full specifications
| Air Cleaner | Dry-type safety element and restriction indicator | ↗ |
| Alternator | 20/50 Amp (rpm-based) | ↗ |
| Axle/Suspension | Rigid/fixed (rear) | ↗ |
| Battery | 550 CCA | ↗ |
| Bearing Dimensions | 1.3 bore | ↗ |
| Bearing Dimensions - Secondary Belt | 1.8 | ↗ |
| Belt Type | V-belt | ↗ |
| Blade Travel Above Ground | 8 in (20.3 cm) | ↗ |
| Blade Travel Below Ground | 2.5 in (63.5 mm) | ↗ |
| Brake Type | Spring-applied, hydraulic release at rear motors | ↗ |
| Chip Blade Dimension | 33-in wide x 12-in tall (83.8 cm x 30.5 cm) | ↗ |
| Chip Containment | 7.5 cu ft | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Fixed side | ↗ |
| Controller | Danfoss® | ↗ |
| Cooling Medium | Air | ↗ |
| Cutterwheel Cut Above Ground | 24 in (61.0 cm) | ↗ |
| Cutterwheel Cut Below Ground | 15 in (38.1 cm) | ↗ |
| Cutterwheel Diameter without Teeth | 17 in (43.2 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Shaft | 1.8 | ↗ |
| Cutterwheel Speed | 1525 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 47 in (119 cm) | ↗ |
| Cutterwheel Thickness | .5 in | ↗ |
| Degree of Oscillation | 12 deg | ↗ |
| Directional Control | Electric over hydraulic | ↗ |
| Fender Description | Yes | ↗ |
| Filtration Method | 10-micron fill strainer and 6-micron return filter | ↗ |
| Flow Control | SmarSweep | ↗ |
| Frame Description | Welded tube and plate steel | ↗ |
| Fuel Tank Capacity | 10 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Gross Horsepower (Maximum) | 40 hp | ↗ |
| Height | 53 in (135 cm) | ↗ |
| High Speed Travel | 130 ft/min | ↗ |
| Jackshaft Bearing Type | Sealed ball | ↗ |
| Jackshaft Dimension | 1.3 | ↗ |
| Length | 118 in (300 cm) | ↗ |
| Low Speed Travel | 65 ft/min | ↗ |
| Make and Model | Briggs & Stratton Vanguard® EFI/ETC | ↗ |
| Max Fuel Consumption | 2.2 gph | ↗ |
| Maximum Angle of Continuous Operation | 25 deg | ↗ |
| Number of Cylinders | 2 | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 20 | ↗ |
| Number of Primary Belts | 2 individual (matched pair) | ↗ |
| Number of Secondary Belts | 6 banded | ↗ |
| Number of Teeth | 20 | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 2.5 qt | ↗ |
| Overall Height Transport | 53 in (135 cm) | ↗ |
| Overall Width Transport (with duals) | 50.1 in (127 cm) | ↗ |
| Overall Width Transport (without duals) | 35.5 in (90.2 cm) | ↗ |
| Pump Flow at Maximum RPM | 6.2 gpm | ↗ |
| Recommended Oil | 10W30 (see engine manual) | ↗ |
| Recommended Oil Type | Vermeer HyPower 68 | ↗ |
| Reversible Pockets/Teeth | 20 | ↗ |
| Shutdown System | Engine low oil pressure will derate engine | ↗ |
| Sound Power | 107.6 dB(A) | ↗ |
| Steerable Axle Type | Hydraulic steering oscillating axle | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →