Vibratory Plow
A vibratory plow buries cable, small pipe and conduit without opening a trench: a vibrating blade slices the ground while a feed system pulls the product into the slot behind it, and the ground closes over the top. It is the fastest, least disruptive way to install shallow utilities under lawns, boulevards and finished surfaces.
Cat classes
Elija una clase de tamaño — la capacidad y el alcance varían en la gama.
Cómo funciona
An eccentric-weight vibrator on the plow frame oscillates a narrow blade thousands of times per minute, momentarily fluidizing the soil around the cutting edge so the machine can draw the blade forward with a fraction of the static pull otherwise needed. The product—cable, duct or flexible pipe—feeds through a chute on the blade's trailing edge and lays at the blade's set depth as the machine advances. The slot left behind is a narrow slit rather than an open trench; surface restoration is typically a wheel-rolled seam. Larger units in the class combine plow, trencher and boring attachments on one utility tractor so a single machine handles turf plowing, road-edge trenching and under-drive crossings.
Tipos y variantes
- Walk-behind plows
- Pedestrian units up to 25 hp for irrigation wire, dog fence and low-voltage cable in finished lawns.
- Ride-on / tracked plow tractors
- Self-propelled utility tractors in the 25–60 hp band with plow attachments for production cable and fiber burial.
- Combination utility tractors
- Machines 60+ hp accepting interchangeable plow, trencher and reel attachments for full-service utility installation.
Especificaciones clave
| Especificación | Rango típico | Qué significa |
|---|---|---|
| Engine power | 8.2–310 kW | The catalog bands the class at up to 25 hp (walk-behind and small units), 25–60 hp (standard ride-on tractors), and 60+ hp (large plows). |
| Operating weight | 327–21 668 kg | Catalog records span walk-behind units to the largest tractors in the class. |
| Hydraulic flow rate | 28–170 L/min | Powers the plow vibrator and product-feed systems across the class. |
Cómo la industria lo dimensiona
Vibratory plows are sized by engine power and by the depth and product size they can pull. The catalog bands the class at up to 25 hp, 25–60 hp, and 60+ hp. Walk-behind and small ride-on plows (up to 25 hp) handle irrigation, dog fence and low-voltage cable in a finished lawn. The standard cable plow (25–60 hp) handles fiber, electric and gas service lines pulled in without opening a trench. Large plows (60+ hp) handle main-line fiber and gas distribution across long runs and hard ground. Ground conditions size the machine as much as the product: heavier, higher-power units maintain pull in dense or rocky ground where light plows stall.
Aplicaciones
- Fiber and communication drop burial across lawns and boulevards
- Electric and gas service installation from main to meter
- Irrigation wire and small-pipe placement on developed properties
- Long-run rural cable plowing with ride-on tractors
- Golf course, campus and cemetery utility work where surface disturbance must be minimal
Seguridad y operación
- Call 811 and pothole conflicting utilities first—a plow blade slicing blind at burial depth is a classic strike mechanism.
- Keep hands and feet clear of the vibrating blade and feed chute during operation and product loading.
- Walk-behind units transmit vibration to the operator; manage exposure time per hand-arm vibration practice.
- On slopes and wet turf, tracked/ride-on units must respect slope limits—the drawbar load shifts the tipping line.
- De-energize or verify product before plowing live conductors; only approved live-line methods apply.
Normas y certificaciones
- CGA · Best Practices / 811
- Locate-and-verify process before any ground-slicing installation.
- OSHA · 29 CFR 1926 Subpart P
- Applies to potholing and any open excavation adjoining plow runs.
Preguntas frecuentes
How is a vibratory plow different from a trencher?
What can be installed with a vibratory plow?
What size plow does residential service work need?
Does plowing work in all ground?
Comparar modelos populares
Buscar por especificación →Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.
| Modelo | Peso operativo | Profundidad de excavación máx | Alcance máx | Potencia del motor |
|---|---|---|---|---|
| Ditch Witch AT40 All Terrain Directional Drill | 3,697 lb (1,677 kg) | - | - | 160 hp |
| Vermeer D40x55 S3 HDD | 22,379 lb (10,151 kg) | - | - | 139 hp |
| Ditch Witch JT10 Directional Drill | 7,385 lb (3,350 kg) | - | - | 66 hp |
| Ditch Witch JT20 Directional Drill | 11,883 lb (5,390 kg) | - | - | 74 hp |
| Ditch Witch JT40 Directional Drill | 20,503 lb (9,300 kg) | - | - | 160 hp |
| Ditch Witch JT5 Directional Drill | 3,691 lb (1,674 kg) | - | - | 25 hp |
Equipos relacionados
Explorar por fabricante
Fuentes
Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.
Todos los modelos
96 modelos · Página 2 de 2 · Cada especificación citada a la fuente