10,000-15,000 lb Pneumatic Tire Forklift
The 10,000–15,000 lb pneumatic tire forklift is a mid-capacity class designed for steel bundles, precast concrete elements, and heavily loaded pallets that exceed the capacity of lighter machines. With load capacities ranging from 4,536 to 6,700 kg and lift heights between 9.8 and 19.8 ft, this size bridges yard handling and heavy material staging on construction and industrial sites. It sits between the 6,000–10,000 lb class for general-purpose outdoor work and the 15,000–25,000 lb class for large structural and manufacturing loads.
Cat classes
Elija una clase de tamaño — la capacidad y el alcance varían en la gama.
Especificaciones clave
| Especificación | Rango típico | Qué significa |
|---|---|---|
| Load capacity | 10,000–15,000 lb (4,536–6,700 kg) | Maximum rated load at standard load center, typically 24 inches |
| Lift height | 9.8–19.8 ft (3.0–6.0 m) | Maximum fork elevation, varies by mast configuration (two-stage, three-stage, quad) |
| Tire type | Pneumatic | Air-filled tires for outdoor use on gravel, asphalt, and uneven surfaces |
| Power source | Diesel, LPG, or dual-fuel | Internal combustion engines common in this size for outdoor industrial applications |
Cómo elegir
This size is appropriate when loads routinely exceed 8,000 lb or when handling steel bundles, heavy precast components, and dense pallet loads that smaller machines cannot safely lift. The 6,000–10,000 lb Pneumatic Tire Forklift is often sufficient for standard construction materials, lumber bundles, and lighter outdoor tasks, offering better maneuverability and lower operating cost. When loads approach or exceed 15,000 lb—such as large concrete forms, structural steel assemblies, or industrial machinery—the 15,000–25,000 lb Pneumatic Tire Forklift provides the necessary capacity and stability. This middle band balances lifting power with mobility for yards and staging areas where multi-ton loads are routine but extreme capacities are unnecessary.
Lo que maneja este tamaño
- Moving steel I-beam bundles and structural steel packages at fabrication yards
- Placing precast concrete wall panels and architectural elements on flatbed trailers
- Staging heavy machinery crates and industrial equipment at manufacturing facilities
- Handling densely loaded pallets of roofing materials, masonry, or aggregates
- Loading and unloading shipping containers with concentrated cargo
- Transporting large HVAC units and mechanical equipment on construction sites
Seguridad y operación
- Operator certification required per OSHA 1910.178 for powered industrial truck operation
- Load center and capacity plate adherence critical; exceeding rated capacity causes tip-over risk
- Pneumatic tires require regular pressure checks to maintain stability and load distribution
- Overhead clearance and mast height must be confirmed before entering structures or under canopies
Transporte y logística
- Requires heavy-duty flatbed or equipment trailer, typically 14,000–20,000 lb GVWR minimum
- Loading via drive-on ramps or dock; some units require lowboy trailer depending on overall height
- Towing typically requires pickup truck rated for 15,000+ lb combined load or commercial tractor
Alimentación
- Diesel fuel or liquid propane (LPG) tanks, refilled on site or via portable fuel service
- Dual-fuel models switch between gasoline and LPG depending on availability and emissions requirements
- No external electrical infrastructure required; engines provide independent operation
Preguntas frecuentes
What distinguishes this class from a 6,000–10,000 lb forklift?
Can this size operate indoors?
What mast configurations are available in this capacity range?
Comparar modelos populares
Buscar por especificación →Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.
| Modelo | Capacidad de carga | Altura de elevación | Potencia del motor |
|---|---|---|---|
| EP Equipment CPCD50T9 | 11,023 lb (5,000 kg) | 9.8 ft (3.0 m) | - |
| Mitsubishi FD50CN3 | 11,023 lb (5,000 kg) | 10.8 ft (3.3 m) | - |
| Mitsubishi FD50N3 | 11,023 lb (5,000 kg) | 10.8 ft (3.3 m) | - |
| Mitsubishi FD55N3 | 12,125 lb (5,500 kg) | 10.8 ft (3.3 m) | - |
| Mitsubishi FG50CN3 | 11,023 lb (5,000 kg) | 10.8 ft (3.3 m) | - |
| Mitsubishi FG50N3 | 11,023 lb (5,000 kg) | 10.8 ft (3.3 m) | - |
Equipos relacionados
Explorar por fabricante
Fuentes
Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.
10,000-15,000 lb Pneumatic Tire Forklift
37 modelos · Cada especificación citada a la fuente
