CAT CLASS: HQ-10341

Up to 5,500 lb Manual Pallet Jack

The up to 5,500 lb manual pallet jack is the industry-standard hand-powered unit for moving palletized loads on level warehouse and loading-dock floors. With capacities typically ranging from 726 to 2,268 kg (roughly 1,600 to 5,000 lb) and lift heights from 3.2 to 19.7 feet, this class handles the vast majority of routine horizontal pallet transport. For loads exceeding 5,500 lb or applications requiring greater stability with heavy goods, the 5,500+ lb manual pallet jack is the appropriate step up.

111

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Load capacity	726–2,268 kg (1,600–5,000 lb)	Maximum safe load for the hydraulic pump and fork structure; most units cluster near the 5,500 lb upper limit.
Lift height	3.2–19.7 ft (1.0–6.0 m)	Vertical travel from ground contact to maximum fork elevation; high-lift models approach 20 feet for order-picking tasks.
Fork length	42–48 in (107–122 cm)	Standard dimensions to accommodate 40×48 in and 48×40 in GMA pallets with adequate support.

Cómo elegir

This size class is appropriate for standard GMA pallets, IBC totes, and skidded materials up to about 2.5 tons on smooth concrete or asphalt. It suits warehouse aisles, truck loading docks, and retail backrooms where loads remain within the 5,500 lb threshold and the floor is reasonably level. When total load weight—pallet plus product—exceeds 5,500 lb, or when handling dense materials like metal coils or machinery components, the 5,500+ lb Manual Pallet Jack offers the reinforced frame and larger-diameter wheels necessary for safe operation and extended service life.

Lo que maneja este tamaño

Moving boxed consumer goods from receiving dock to warehouse racking
Transporting bagged cement or aggregates on smooth warehouse floors
Loading and unloading 48×40 in pallets from delivery trucks
Repositioning IBC totes of liquids in food processing facilities
Shifting cartons of automotive parts in distribution centers
Order-picking elevated stock with high-lift scissor-frame models

Seguridad y operación

Operator must verify total load weight—pallet plus cargo—remains within the unit's rated capacity to prevent hydraulic failure or frame damage
Smooth, level floors are essential; even minor slopes or surface irregularities can cause the load to shift or the jack to roll uncontrolled
Proper hand and foot positioning during pumping and travel prevents crush injuries between the handle and fixed objects
Load must be centered on forks and stable; overhanging or unbalanced cargo increases tip-over risk during turns

Transporte y logística

Compact footprint allows storage on delivery trucks or in service vans; most units weigh 150–250 lb and fit through standard doorways
No trailer required; units are typically delivered by hand-truck or rolled directly off a liftgate-equipped vehicle
Fork-over design permits nesting for multi-unit transport in larger box trucks

Alimentación

Purely manual hydraulic operation; no electrical connection, battery charging, or fuel required
Operator pumps the handle to raise forks via an internal hydraulic cylinder; release valve lowers the load by gravity
Zero emissions and silent operation suit indoor use in temperature-controlled or noise-sensitive environments

Preguntas frecuentes

What distinguishes a standard manual pallet jack from a high-lift model in this weight class?

High-lift or scissor-lift manual jacks extend forks vertically to 10–20 feet for order-picking or elevated staging, while standard units raise loads only 7–8 inches for ground-level transport. Both share the same weight-capacity ceiling but differ in vertical-travel mechanism and frame geometry.

Can this size class operate on outdoor asphalt or gravel surfaces?

Standard manual pallet jacks are designed for smooth, hard indoor surfaces. Outdoor use on asphalt may be feasible if the pavement is level and well-maintained, but gravel, dirt, or uneven terrain requires a rough-terrain pallet jack with larger pneumatic wheels and reinforced construction.

How does load capacity relate to fork length and width?

Rated capacity assumes proper load distribution across the full fork length. Shorter forks or loads positioned near the fork tips reduce effective capacity and increase stress on the hydraulic system. Standard 42–48 in forks suit GMA pallets; longer or wider specialty pallets may require custom fork dimensions within the same weight rating.

Comparar modelos populares

Buscar por especificación →

Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.

Modelo	Capacidad de carga	Altura de elevación	Potencia del motor
EP Equipment EPT12-F3H	2,646 lb (1,200 kg)	3.2 ft (1.0 m)	-
Hyster P30UT	3,300 lb (1,497 kg)	7.5 ft (2.3 m)	-
Hyster W45ZHD	4,500 lb (2,041 kg)	8.4 ft (2.6 m)	-
Jungheinrich EJC 110/112	2,205 lb (1,000 kg)	14.1 ft (4.3 m)	-
Jungheinrich EJC 212z-220z	2,646 lb (1,200 kg)	19.7 ft (6.0 m)	-
Mitsubishi PBF20N3DR	4,409 lb (2,000 kg)	5.6 ft (1.7 m)	-

Equipos relacionados

5,500+ lb Manual Pallet Jack 53

Explorar por fabricante

Mitsubishi 18 EP Equipment 14 Jungheinrich 4 Noblelift 3 Crown 3 Big Joe 3 Hyster 2 Unicarriers 1

Fuentes

Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.

bigjoeforklifts.com ↗crown.com ↗ep-equipment.com ↗hcforklift.com ↗hyster.com ↗jungheinrich.de ↗

Up to 5,500 lb Manual Pallet Jack

50 modelos · Página 1 de 2 · Cada especificación citada a la fuente