1,000-2,000 cfm Air Mover
The 1,000-2,000 cfm air mover is the standard workhorse for restoration and water damage work, designed to move air across rooms and under cabinets to accelerate drying. This middle rung in the air mover ladder bridges the Up to 1,000 cfm Air Mover for tight spaces and the 2,000+ cfm Air Mover for commercial-scale work. Fifteen models from manufacturers including Xpower, Allegro, Phoenix, and B-Air deliver airflow between 1,000 and 1,763 cfm.
Cat classes
Elija una clase de tamaño — la capacidad y el alcance varían en la gama.
Especificaciones clave
| Especificación | Rango típico | Qué significa |
|---|---|---|
| Airflow | 1,000–1,763 cfm | Volume of air moved per minute, determining coverage area and drying speed |
| Coverage Pattern | Across-room and under-cabinet | Directional airflow designed to reach beneath fixtures and across typical residential spaces |
| Operating Positions | Multiple angle settings | Adjustable positioning to direct airflow horizontally, vertically, or at intermediate angles |
Cómo elegir
This 1,000-2,000 cfm band suits standard restoration jobs where air needs to reach under cabinets, across single rooms, and into moderately confined areas. The Up to 1,000 cfm Air Mover is the better choice for extremely tight crawl spaces, closets, or jobs requiring minimal power draw and maximum portability. The 2,000+ cfm Air Mover becomes necessary for large commercial spaces, multi-room drying, or when evaporation rates demand higher airflow volumes than this class can sustain.
Lo que maneja este tamaño
- Drying water-damaged kitchens with airflow directed under base cabinets
- Residential water restoration following plumbing leaks or small floods
- Accelerating paint and floor coating cure times in single rooms
- Ventilating enclosed work areas during renovation or cleaning
- Moisture removal in basements and crawl spaces with moderate access
- Drying carpet and padding after extraction in residential settings
Seguridad y operación
- Grounded three-prong plugs required; GFCI protection recommended in wet environments
- Cord routing to prevent trip hazards when positioning units across traffic paths
- Ventilation intake screens kept clear of debris to prevent motor overheating
- Units positioned to avoid directing airflow onto electrical panels or open flame
Transporte y logística
- Portable by hand or hand truck; most units weigh 20-40 lb and feature integrated handles or recessed grips
- Multiple units stack in vans or pickup beds for multi-site restoration routes
- No trailer required; typical crew carries 4-8 units in a standard cargo van
Alimentación
- Standard 120V household circuits; typical draw 2-8 amps depending on speed setting
- Multiple units may require distribution across separate circuits to avoid tripping breakers
- Compatible with portable generators for sites without utility power
Preguntas frecuentes
How many air movers in this class are needed for a typical water damage job?
What differentiates models within the 1,000-1,763 cfm range?
Can this size class handle commercial water restoration jobs?
Comparar modelos populares
Buscar por especificación →Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.
| Modelo | Flujo de aire | Capacidad de combustible |
|---|---|---|
| Echo PB-9010H | 1,110 cfm | 83.8 gal |
| Echo PB-9010T | 1,110 cfm | 83.8 gal |
| Xpower M-25 | 1,450 cfm | - |
Equipos relacionados
Explorar por fabricante
Fuentes
Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.
1,000-2,000 cfm Air Mover
17 modelos · Cada especificación citada a la fuente
