Up to 55 ft Atrium / Spider Lift
Up to 55 ft atrium and spider lifts are compact, tracked aerial platforms designed to pass through standard 30 in doorways and deploy stabilizing outriggers on finished interior floors without damage. Working heights in this class range from 5.2 to 54.0 ft, with operating weights between 1,850 and 4,730 kg. These machines occupy the entry rung of the atrium/spider lift ladder, prioritizing access and floor protection over reach.
Cat classes
Elija una clase de tamaño — la capacidad y el alcance varían en la gama.
Especificaciones clave
| Especificación | Rango típico | Qué significa |
|---|---|---|
| Working height | 5–54 ft (1.5–16.5 m) | Maximum vertical reach from ground to platform; suits low to mid-height interior tasks. |
| Platform capacity | 441–507 lb (200–230 kg) | Weight limit for operators and tools; typically accommodates one or two workers with light materials. |
| Operating weight | 4,079–10,428 lb (1,850–4,730 kg) | Total machine weight; determines floor loading and transport trailer requirements. |
| Gradeability | 45–60% | Maximum slope the machine can climb or descend under power on its tracks. |
Cómo elegir
This size class fits work in finished interiors where doorway access, floor protection, and compact footprint matter more than extreme height. It handles atrium glazing, chandelier service, church ceilings, and retail displays up to approximately 50 ft. When working height exceeds 55 ft—such as tall hotel lobbies or multi-story atriums—the 55-85 ft Atrium / Spider Lift class provides the necessary reach while maintaining the same access and outrigger advantages. Jobs below 20 ft in open spaces may be better served by lower-cost scissor or push-around lifts if doorway constraints and floor sensitivity are not factors.
Lo que maneja este tamaño
- Installing or cleaning glass panels in two- to four-story hotel atriums
- Servicing chandeliers and lighting fixtures in lobbies and banquet halls
- Painting or repairing vaulted ceilings in church sanctuaries
- HVAC duct work and diffuser replacement in retail mezzanines
- Window film application or facade maintenance in narrow courtyards
- Audio-visual equipment installation in conference centers with restricted access
Seguridad y operación
- Outriggers must be fully extended and properly positioned on level, load-bearing surfaces before platform elevation
- Floor loading calculations are essential; finished floors, especially older structures, may require load-spreading pads or protective matting
- Operators must verify overhead clearance for booms and platform swing radius, particularly near glass and architectural finishes
- Machines are designed for firm, stable ground; soft soil, gravel, or uneven outdoor terrain can compromise outrigger stability
Transporte y logística
- Machines in this weight range typically require a dual-axle equipment trailer rated for 2,000–5,500 kg
- Most models fit within standard trailer widths and can be towed by 3/4-ton or 1-ton pickup trucks
- Track-driven units load via ramps or tilt-bed trailers; no crane rigging typically required
Alimentación
- Electric models dominate this class for indoor use, drawing from standard 110V or 220V site power with onboard battery packs for cordless operation
- Hybrid diesel-electric and bi-energy (battery + diesel) models available for longer run times or outdoor applications
- Battery runtime varies by model and load; most electric units require overnight charging between shifts
Preguntas frecuentes
What doorway width do atrium lifts in this class require?
How much floor load do outriggers impose on finished surfaces?
Can spider lifts operate on slopes or ramps inside buildings?
Comparar modelos populares
Buscar por especificación →Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.
| Modelo | Altura de trabajo | Capacidad de plataforma |
|---|---|---|
| Niftylift TD120T | 40 ft (12.2 m) | 441 lb (200 kg) |
| Bluelift B53 | 53 ft (16.2 m) | - |
| Niftylift TD120TN | 40 ft (12.2 m) | 441 lb (200 kg) |
| Niftylift TD150T | 48.2 ft (14.7 m) | - |
| CMC 42F | 43 ft (13.1 m) | 507 lb (230 kg) |
| CMC 50F | 50 ft (15.2 m) | 441 lb (200 kg) |
Equipos relacionados
Explorar por fabricante
Fuentes
Cada especificación se verifica con los datos publicados por el fabricante, con la fuente enlazada como referencia.
Up to 55 ft Atrium / Spider Lift
19 modelos · Cada especificación citada a la fuente
